Omni 56K II and Omni 56K Plus II User’s Guide

COMMAND

OPTIONS

FUNCTION & DESCRIPTION

REF.

 

 

 

 

 

V1 *

Displays the result code in verbose form.

 

 

 

 

 

Xn

n=0-7

Result code options, see Table 4-1.

S23.3-5

 

5 *

 

 

 

 

 

 

Zn

n=0-2

Resets the modem and set power-on profile.

S15.5-7

 

 

 

 

 

Zn

Resets the modem and load user profile n (0-1).

 

 

 

 

 

 

Z2

Resets the modem and load factory settings.

 

 

 

 

 

+++

 

This is the escape sequence code. When entered,

 

 

 

the modem returns to online command mode.

 

 

 

 

 

5.1.2Extended AT& Command Sets

Table 5-3 Extended AT& Command Sets

COMMAND

OPTIONS

FUNCTION & DESCRIPTION

REF.

 

 

 

 

&Bn

 

Data rate, terminal-to-modem. (DTE/DCE)

S28.6

 

 

 

 

 

&B0

The DTE rate follows the connection rate. (See also

 

 

 

S44.6)

 

 

&B1 *

The DTE/DCE rates are fixed at the DTE setting

 

 

 

(See also S18, S20, and S44.6)

 

 

 

 

 

&Cn

 

Carrier Detect (CD) options

S21.4

 

 

 

 

 

&C0

CD always ON (See also S42.7)

 

 

 

 

 

 

&C1 *

CD tracks the presence of carrier (See also S38.3,

 

 

 

S42.7)

 

 

 

 

 

&Dn

 

Data Terminal Ready (DTR) options. (See also S25)

S21.6-7

 

 

 

 

 

&D0

Ignore DTR signal, assume DTR is always ON.

 

 

 

 

 

 

&D1

108.1, DTR OFF-ON transition causes dialing of the

 

 

 

default number. (See also 'AT*Dn' and S48.4)

 

 

 

 

 

 

&D2 *

108.2, Data Terminal Ready, DTR OFF causes the

 

 

 

modem to hang up.

 

 

&D3

Same as &D2 but DTR OFF causes the modem to

 

 

 

hang up and reset from profile 0.

 

&F

 

Load factory settings to RAM as active configuration.

 

 

 

 

 

5-4

Command Sets