ZyXEL Communications P-2302R-P1C manual Using SysLog, ZyXEL Device Setup, ∙ Unix Setup

P2302R-P1C Support Notes

Using SysLog

4.ZyXEL Device Setup

Configuration:

1.Active, use the space bar to turn on the syslog option.

2.Syslog IP Address, enter the IP address of the UNIX server that you wish to send the syslog.

3.Log Facility, use the space bar to toggle between the 7 different local options.

∙UNIX Setup

1.Make sure that your syslogd starts with -rargument.

-r, this option will enable the facility to receive message from the network using an Internet domain socket with the syslog services. The default setting is not enabled.

2. Edit the file /etc/syslog.conf by adding the following line at the end of the /etc/syslog.conf file.

local1.*/var/log/zyxel.log

Where /var/log/zyxel.log is the full path of the log file.

3. Restart syslogd.

∙CDR log(call messages)

Format:

49

All contents Copyright © 2007 ZyXEL Communications Corporation.