P2302R-P1C Support Notes
|
| Menu 21.1 - Filter Rules | Summary |
# A Type | Filter Rules | M m n | |
- - | - - - | ||
1 | Y IP | Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=80 | N D N |
2 | Y IP | Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=53 | N D N |
3 | Y IP | Pr=17, SA=0.0.0.0, DA=0.0.0.0,DP=53 | N D F |
|
|
|
|
|
|
|
|
|
|
|
|
6. Apply the filter set to the 'Output Protocol Filter Set' in the remote node setup.
A filter for blocking a specific client
Configuration
1. Create a filter set in Menu 21, e.g., set 1
| Menu 21 - Filter Set Configuration | ||
Filter |
| Filter |
|
Set # | Comments | Set # | Comments |
1 | Block a client | 7 | _______________ |
|
|
|
|
2 | _______________ | 8 | _______________ |
3 | _______________ | 9 | _______________ |
4 | _______________ | 10 | _______________ |
5 | _______________ | 11 | _______________ |
6 | _______________ | 12 | _______________ |
|
|
|
|
Enter Filter Set Number to Configure= 0
Edit Comments=
Press ENTER to Confirm or ESC to Cancel:
27
All contents Copyright © 2007 ZyXEL Communications Corporation.
