
P2302R-P1C Support Notes
2. One rule for blocking all packets from this client
Menu 21.1.1 - TCP/IP Filter Rule
Filter #: 1,1
Filter Type= TCP/IP Filter Rule
Active= Yes |
|
IP Protocol= 0 | IP Source Route= No |
Destination: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #=
Port # Comp= None
Source: IP Addr= 192.168.1.5
IP Mask= 255.255.255.255
Port #=
Port # Comp= None
| TCP Estab= N/A |
|
| |
| More= | No | Log= None |
|
| Action Matched= Drop |
| ||
| Action Not Matched= Forward |
| ||
| Press | ENTER to Confirm or ESC to Cancel: |
| |
|
|
|
|
|
|
|
|
|
|
Key Settings: |
|
Source IP addr | Enter the client IP in this field |
IP Mask | here the IP mask is used to mask the bits of the IP address given in the 'Source IP |
Addr=' field, for one workstation it is 255.255.255.255. | |
Action Matched | Set to 'Drop' to drop all the packets from this client |
Action Not Matched | Set to 'Forward' to allow the packets from other clients |
3. Apply the filter set number '1' to the 'Output Protocol Filter Set' field in the remote node setup.
A filter for blocking a specific MAC address
28
All contents Copyright © 2007 ZyXEL Communications Corporation.