P2302R-P1C Support Notes
Menu 21.1.1 - Generic Filter Rule
Filter #: 1,1
Filter Type= Generic Filter Rule
Active= Yes |
|
Offset= 6 |
|
Length= 6 |
|
Mask= ffffffffffff |
|
Value= 0080c84cea63 |
|
More= No | Log= None |
Action Matched= Drop
Action Not Matched= Forward
Key Settings:
∙Generic Filter Ruls
Set the 'Filter Type' to 'Generic Filter Rule'
∙Active
Turn 'Active' to 'Yes'
∙Offset (in bytes)
Set to '6' since the source MAC address starts at 7th octets we need to skip the first octets of the destination MAC address.
∙Length (in bytes)
Set to '6' since MAC address has 6 octets.
∙Mask (in hexadecimal)
Specify the value that the ZyXEL Device will logically qualify (logical AND) the data in the packet.
Since the Length is set to 6 octets the Mask for it should be 12 hexadecimal numbers. In this case, we intent to set to 'ffffffffffff' to mask the incoming source MAC address, [00 80 c8 4c ea 63].
∙Value (in hexadecimal)
Specify the MAC address [00 80 c8 4c ea 63] that the ZyXEL Device should use to compare with the masked packet. If the result from the masked packet matches the 'Value', then the packet is considered matched.
31
All contents Copyright © 2007 ZyXEL Communications Corporation.
