ZyXEL Communications P-2302R-P1C manual Your ISP checks the Host Name

Models: P-2302R-P1C

1 145
Download 145 pages 28.04 Kb
Page 109
Image 109

P2302R-P1C Support Notes

Key settings:

a.Assigned By, Choose 'IP address attached on LAN'.

b.IP Address, Enter the IP address of the PC which is installed by the ISP at the first installation.

2.Your ISP checks the 'Host Name'

Some ISPs take advantage of the 'host name' message in a DHCP packet such as @home to do the authentication. When first installing, the ISP's tech people configure the host name as the 'Computer Name' of the PC in the 'Networking' settings. When the ZyXEL Device is attached to the cable modem to connect to the ISP, we should configure this host name in the ZyXEL Device's system (menu 1).

Menu 1 - General Setup

System Name= zyxel

Key Setting:

System Name= the system name must be the same as the PC's computer name.

3.Your ISP checks 'User ID'

This authentication type is used by RoadRunner ISP; currently they use RR-TAS (Toshiba Authentication Service) and RR-Manager authentications. You must configure the correct 'Service Type', username and password for your ISP in menu 4.

Menu 4 - Internet Access Setup

ISP's Name= MyISP

Encapsulation= Ethernet

Service Type= RR-Toshiba

My Login= cso@zyxel

My Password= ********

Retype to Confirm= N/A

109

All contents Copyright © 2007 ZyXEL Communications Corporation.

Page 109
Image 109
ZyXEL Communications P-2302R-P1C manual Your ISP checks the Host Name