P2302R-P1C Support Notes
∙Action Matched=
Enter the action you want if the masked packet matches the 'Value'. In this case, we will drop it.
∙Action Not Matched=
Enter the action you want if the masked packet does not match the 'Value'. In this case, we will forward it. If you want to configure more rules please select 'Check Next Rule' to start configuring the next new rule. However, please note that the 'Filter Type' must be also 'Generic Filter Rule' but not others. Because the Generic and TCPIP (IPX) filter rules must be in different filter sets.
Menu 21.1.2 - Generic Filter Rule
Filter #: 1,2
Filter Type= Generic Filter Rule
Active= Yes |
|
Offset= 6 |
|
Length= 6 |
|
Mask= ffffffffffff |
|
Value= 0080c810234a |
|
More= No | Log= None |
Action Matched= Drop
Action Not Matched= Forward
You can now apply it to the 'General Ethernet Setup' in Menu 3.1. Please note that the 'Generic Filter' can only
be applied to the 'Device Filter' but not the 'Protocol Filter' that is used for configuring the TCPIP and IPX
filters.
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
protocol filters= device filters= 1
Output Filter Sets: protocol filters= device filters=
32
All contents Copyright © 2007 ZyXEL Communications Corporation.
