P-660R/H-D Series User’s Guide

The following table describes the fields in this screen.

Table 62 System Status: Show Statistics

LABEL

DESCRIPTION

 

 

System up Time

This is the elapsed time the system has been up.

 

 

CPU Load

This field specifies the percentage of CPU utilization.

 

 

LAN or WAN Port

This is the WAN or LAN port.

Statistics

 

Link Status

This is the status of your WAN link.

 

 

Upstream Speed

This is the upstream speed of your Prestige.

 

 

Downstream Speed

This is the downstream speed of your Prestige.

 

 

Node-Link

This field displays the remote node index number and link type. Link types are

 

PPPoA, ENET, RFC 1483 and PPPoE.

Interface

This field displays the type of port.

 

 

Status

For the WAN port, this displays the port speed and duplex setting if you're using

 

Ethernet encapsulation and down (line is down), idle (line (ppp) idle), dial

 

(starting to trigger a call) and drop (dropping a call) if you're using PPPoE

 

encapsulation.

 

For a LAN port, this shows the port speed and duplex setting.

 

 

TxPkts

This field displays the number of packets transmitted on this port.

 

 

RxPkts

This field displays the number of packets received on this port.

 

 

Errors

This field displays the number of error packets on this port.

 

 

Tx B/s

This field displays the number of bytes transmitted in the last second.

 

 

Rx B/s

This field displays the number of bytes received in the last second.

 

 

Up Time

This field displays the elapsed time this port has been up.

 

 

Collisions

This is the number of collisions on this port.

 

 

Poll Interval(s)

Type the time interval for the browser to refresh system statistics.

 

 

Set Interval

Click this button to apply the new poll interval you entered in the Poll Interval

 

field above.

Stop

Click this button to halt the refreshing of the system statistics.

 

 

17.3 DHCP Table Screen

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain TCP/IP configuration at start-up from a server. You can configure the Prestige as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP configuration for the clients. If set to None, DHCP service will be disabled and you must have another DHCP server on your LAN, or else the computer must be manually configured.

Click Maintenance, and then the DHCP Table tab. Read-only information here relates to your DHCP status. The DHCP table shows current DHCP Client information (including IP Address, Host Name and MAC Address) of all network clients using the DHCP server.

179

Chapter 17 Maintenance