P-660R/H-D Series User’s Guide

Figure 115 Menu 11.5 Remote Node Filter (PPPoA or PPPoE Encapsulation)

Menu 11.5 - Remote Node Filter Input Filter Sets:

protocol filters= 1, 5, 9, 12 device filters=

Output Filter Sets: protocol filters= device filters=

Call Filter Sets: protocol filters=

device filters=

Enter here to CONFIRM or ESC to CANCEL:

23.4.1 Web Configurator Internet Security Filter Rules

In the web configurator, open the Security screen as shown next. Select the predefined filter rules and click Apply. This section applies to the P-660R-D.

Figure 116 Internet Security

Once you apply the filter rules in the web configurator, filter sets 11 and 12 are automatically applied in the protocol filters field under Input Filter Sets in SMT menu 11.5.

Note: SMT input protocol filter set numbers that were previously applied are erased after you apply the Internet Security filter rules in the web configurator. To reapply them or apply new filter sets, you need to enter the filter set numbers again along with filter sets 11 and 12. For example, to apply filter sets 1 and 2, you enter "1, 2, 11, 12".

23.4.2 Web Configurator Filter Sets

When you apply filter rules using the web configurator, filter sets 11 and 12 are automatically generated in SMT menu 21. This feature is not available on all models.

217

Chapter 23 Remote Node Configuration