P-660R/H-D Series User’s Guide

Table 15 LAN Setup (continued)

LABEL

DESCRIPTION

 

 

Size of Client IP

This field specifies the size or count of the IP address pool.

Pool

 

Primary DNS Server

Enter the IP addresses of the DNS servers. The DNS servers are passed to the

 

DHCP clients along with the IP address and the subnet mask.

Secondary DNS

As above.

Server

 

Remote DHCP

If Relay is selected in the DHCP field above then enter the IP address of the

Server

actual remote DHCP server here.

TCP/IP

 

 

 

IP Address

Enter the IP address of your Prestige in dotted decimal notation, for example,

 

192.168.1.1 (factory default).

IP Subnet Mask

Type the subnet mask assigned to you by your ISP (if given).

 

 

RIP Direction

Select the RIP direction from None, Both, In Only and Out Only.

 

 

RIP Version

Select the RIP version from RIP-1, RIP-2Band RIP-2M.

 

 

Multicast

IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to

 

establish membership in a multicast group. The Prestige supports both IGMP

 

version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.

Any IP Setup

Select the Active check box to enable the Any IP feature. This allows a computer

 

to access the Internet without changing the network settings (such as IP address

 

and subnet mask) of the computer, even when the IP addresses of the computer

 

and the Prestige are not in the same subnet.

 

When you disable the Any IP feature, only computers with dynamic IP addresses

 

or static IP addresses in the same subnet as the Prestige’s LAN IP address can

 

connect to the Prestige or access the Internet through the Prestige.

Apply

Click Apply to save your changes back to the Prestige.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

69

Chapter 5 LAN Setup