P-660R/H-D Series User’s Guide

Figure 121 Menu 11.6 for LLC-based Multiplexing or PPP Encapsulation

Menu 11.6 - Remote Node ATM Layer Options

VPI/VCI (LLC-Multiplexing or PPP-Encapsulation)

VPI #= 0

VCI #= 38

ATM QoS Type= UBR

Peak Cell Rate (PCR)= 0

Sustain Cell Rate (SCR)= 0

Maximum Burst Size (MBS)= 0

ENTER here to CONFIRM or ESC to CANCEL:

In this case, only one set of VPI and VCI numbers need be specified for all protocols. The valid range for the VPI is 0 to 255 and for the VCI is 32 to 65535 (1 to 31 is reserved for local management of ATM traffic).

23.5.3 Advance Setup Options

In menu 11.1, select PPPoE in the Encapsulation field.

Figure 122 Menu 11.1 Remote Node Profile

Menu 11.1 - Remote Node Profile

Rem Node Name= MyISP

Route= IP

Active= Yes

Bridge= No

Encapsulation= PPPoE

Edit IP/Bridge= No

Multiplexing= LLC-based

Edit ATM Options= No

Service Name=

Edit Advance Options= Yes

Incoming:

Telco Option:

Rem Login=

Allocated Budget(min)= 0

Rem Password= ********

Period(hr)= 0

Outgoing:

Schedule Sets=

My Login= ?

Nailed-Up Connection= No

My Password= ?

Session Options:

Authen= CHAP/PAP

Edit Filter Sets= No

 

Idle Timeout(sec)= 0

Press ENTER to Confirm or ESC to Cancel:

Move the cursor to the Edit Advance Options field, press [SPACE BAR] to select Yes, then press [ENTER] to display Menu 11.8 – Advance Setup Options.

Chapter 23 Remote Node Configuration

220