P-660R/H-D Series User’s Guide

Figure 128 Menu 11.1 Remote Node Profile

Menu 11.1 - Remote Node Profile

Rem Node Name= ?

Route= IP

Active= Yes

Bridge= Yes

Encapsulation= ENET ENCAP

Edit IP/Bridge= No

Multiplexing= VC-based

Edit ATM Options= No

Service Name= N/A

Edit Advance Options= N/A

Incoming:

Telco Option:

Rem Login= N/A

Allocated Budget(min)= N/A

Rem Password= N/A

Period(hr)= N/A

Outgoing:

Schedule Sets= N/A

My Login= N/A

Nailed-Up Connection= N/A

My Password= N/A

Session Options:

Authen= N/A

Edit Filter Sets= No

 

Idle Timeout(sec)= N/A

Press ENTER to Confirm or ESC to Cancel:

3Move the cursor to the Edit IP/Bridge field, then press [SPACE BAR] to set the value to

Yes and press [ENTER] to edit Menu 11.3 – Remote Node Network Layer Options.

Figure 129 Menu 11.3 Remote Node Network Layer Options

Menu 11.3 - Remote Node Network Layer Options

IP Options:

Bridge Options:

IP Address Assignment= Static

Ethernet Addr Timeout (min)= 0

Rem IP Addr: 0.0.0.0

 

Rem Subnet Mask= 0.0.0.0

 

My WAN Addr= 0.0.0.0

 

NAT= Full Feature

 

Address Mapping Set=2

 

Metric= 2

 

Private= No

 

RIP Direction= Both

 

Version= RIP-2B

 

Multicast= IGMP-v2

 

IP Policies=

 

Press ENTER to Confirm or ESC to Cancel:

The following table describes the fields in this menu.

Table 83 Remote Node Network Layer Options: Bridge Fields

FIELD

DESCRIPTION

 

 

Bridge (menu 11.1)

Make sure this field is set to Yes.

 

 

Edit IP/Bridge (menu 11.1)

Press [SPACE BAR] to select Yes and press [ENTER] to display menu

 

11.3.

Ethernet Addr Timeout

Type the time (in minutes) for the Prestige to retain the Ethernet Address

(min.) (menu 11.3)

information in its internal tables while the line is down. If this information is

 

retained, your Prestige will not have to recompile the tables when the line

 

comes back up.

227

Chapter 25 Bridging Setup