Appendix D
Do the following to hang your Prestige on a wall.
Note: See the product specifications appendix for the size of screws to use and how far apart to place them.
1Locate a high position on wall that is free of obstructions. Use a sturdy wall.
2Drill two holes for the screws. Make sure the distance between the centers of the holes matches what is listed in the product specifications appendix.
Note: Be careful to avoid damaging pipes or cables located inside the wall when drilling holes for the screws.
3Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall.
4Make sure the screws are snugly fastened to the wall. They need to hold the weight of the Prestige with the connection cables.
5Align the holes on the back of the Prestige with the screws on the wall. Hang the Prestige on the screws.
Figure 218
Appendix D | 332 |