ZyWALL 10 Internet Security Gateway
COMMAND | DESCRIPTION |
Host Address | Enter the address of the host server. |
|
|
Login Type | Anonymous. |
| This is when a user I.D. and password is automatically supplied |
| to the server for anonymous access. Anonymous logins will |
| work only if your ISP or service administrator has enabled this |
| option. |
| Normal. |
| The server requires a unique User ID and Password to login. |
|
|
Transfer Type | Transfer files in either ASCII (plain text format) or in binary |
| mode. |
Initial Remote | Specify the default remote directory (path). |
Directory. |
|
Initial Local | Specify the default local directory (path). |
Directory. |
|
|
|
FTP over WAN will not work if:
1.You have disabled Telnet service in menu 24.11.
2.You have applied a filter in menu 3.1 (LAN) or in menu 11.5 (WAN) to block Telnet service.
3.The IP you entered in the Secured Client IP field in menu 24.11 does not match the client IP. If it does not match, the ZyWALL will disconnect the Telnet session immediately.
4.You have an SMT console session running.
5.The firewall is active. The default firewall policies block all traffic from the WAN, so to enable FTP over the WAN, you must turn the firewall off (menu 21.2) or create a firewall rule to allow FTP from the WAN.
Firmware and Configuration File Maintenance |