ZyWALL 10 Internet Security Gateway

Table 6-5 Fields in Menu 15.1.1

 

FIELD

DESCRIPTION

EXAMPLE

 

 

Set Name

Enter a name for this set of rules. This is a required

NAT_SET

 

 

 

field. Please note that if this field is left blank, the

 

 

 

 

entire set will be deleted.

 

 

 

Action

There are four actions. The default is Edit. Edit means

Edit

 

 

 

you want to edit a selected rule (see following field).

 

 

 

 

Insert Before means to insert a rule before the rule

 

 

 

 

selected. The rules after the selected rule will then be

 

 

 

 

moved down by one rule. Delete means to delete the

 

 

 

 

selected rule and then all the rules after the selected

 

 

 

 

one will be advanced one rule. None disables the

 

 

 

 

Select Rule item.

 

 

 

Select Rule

When you choose Edit, Insert Before or Delete in the

1

 

 

 

previous field the cursor jumps to this field to allow you

 

 

 

 

to select the rule to apply the action in question.

 

 

 

 

 

 

 

You must press [ENTER] at the bottom of the screen to save the whole set. You must

do this again if you make any changes to the set – including deleting a rule. No

changes to the set take place until this action is taken.

Be careful when ordering your rules as each rule is executed in turn beginning from

rule 1.

Selecting Edit in the Action field and then selecting a rule brings up the following menu, Menu 15.1.1.1 - Address Mapping Rule in which you can edit an individual rule and configure the Type, Local and Global Start/End IPs.

Menu 15.1.1.1 Address Mapping Rule

Type= One-to-One

Local IP:

Start=

End = N/A

Global IP:

Start=

End = N/A

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

Figure 6-9 Menu 15.1.1.1 — Editing an Individual Rule in a Set

NAT

6-11