ZyWALL 10 Internet Security Gateway
Menu 3 - LAN Setup
1.LAN Port Filter Setup
2.TCP/IP and DHCP Setup
Enter Menu Selection Number:
Figure 2-11 Menu 3 — LAN Setup
2.9.1 LAN Port Filter Setup
This menu allows you to specify the filter sets that you wish to apply to the LAN traffic. You seldom need to filter the LAN traffic, however, the filter sets may be useful to block certain packets, reduce traffic and prevent security breaches.
Menu 3.1 – LAN Port Filter Setup
Input Filter Sets: protocol filters= 2 device filters=
Output Filter Sets: protocol filters= device filters=
Press ENTER to Confirm or ESC to Cancel:
Figure 2-12 Menu 3.1 — LAN Port Filter Setup
Menu 3.2 is discussed in the next chapter. Please read on.
Hardware Installation & Initial Setup |