ZyWALL 10 Internet Security Gateway

Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.

Table 2-2 Main Menu Commands

OPERATION

KEYSTROKES

DESCRIPTION

Move down to

[ENTER]

To move forward to a submenu, type in the number of the desired

another menu

 

submenu and press [ENTER].

Move up to a

[ESC]

Press the [ESC] key to move back to the previous menu.

previous menu

 

 

Move to a “hidden”

Press the [SPACE

Fields beginning with “Edit” lead to hidden menus and have a

menu

BAR] to change No

default setting of No. Press the [SPACE BAR] to change No to

 

to Yes then press

Yes, then press [ENTER] to go to a “hidden” menu.

 

[ENTER].

 

Move the cursor

[ENTER] or

Within a menu, press [ENTER] to move to the next field. You can

 

[UP]/[DOWN] arrow

also use the [UP]/[DOWN] arrow keys to move to the previous and

 

the next field, respectively.

 

keys

 

Enter information

Fill in, or press the

You need to fill in two types of fields. The first requires you to type

 

[SPACE BAR] to

in the appropriate information. The second allows you to cycle

 

select from choices.

through the available choices by pressing the [SPACE BAR].

Required fields

<? >

All fields with the symbol <?> must be filled in order be able to

 

 

save the new configuration.

N/A fields

<N/A>

Some of the fields in the SMT will show a <N/A>. This symbol

 

 

refers to an option that is Not Applicable.

 

 

 

Save your

[ENTER]

Save your configuration by pressing [ENTER] at the message

configuration

 

“Press ENTER to confirm or ESC to cancel”. Saving the data on

 

 

the screen will take you, in most cases to the previous menu.

 

 

 

Exit the SMT

Type 99, then press

Type 99 at the main menu prompt and press [ENTER] to exit the

 

[ENTER].

SMT interface.

Hardware Installation & Initial Setup

2-5