ZyWALL 10 Internet Security Gateway

Use the instructions in the following table to configure IP Alias parameters.

Table 3-3 IP Alias Setup Menu Fields

FIELD

DESCRIPTION

EXAMPLE

IP Alias

Choose Yes to configure the LAN network for the ZyWALL.

Yes

 

 

 

IP Address

Enter the IP address of your ZyWALL in dotted decimal notation

192.168.2.1

 

 

 

IP Subnet Mask

Your ZyWALL will automatically calculate the subnet mask based on

255.255.255.0

 

the IP address that you assign. Unless you are implementing

 

 

subnetting, use the subnet mask computed by the ZyWALL

 

 

 

 

RIP Direction

Press the [SPACE BAR] to select the RIP direction from Both, In

None

 

Only, Out Only or None.

 

Version

Press the [SPACE BAR] to select the RIP version from RIP-1, RIP-

RIP-1

 

2B or RIP-2M.

 

Incoming

Enter the filter set(s) you wish to apply to the incoming traffic

1

Protocol Filters

between this node and the ZyWALL.

 

Outgoing

Enter the filter set(s) you wish to apply to the outgoing traffic between

2

Protocol Filters

this node and the ZyWALL.

 

 

 

 

When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm…] to save your configuration, or press [ESC] at any time to cancel.

3.3Internet Access Setup

You will see three different menu 4 screens depending on whether you chose Ethernet, PPTP or PPPoE Encapsulation.

3.3.1 Ethernet Encapsulation

You must choose the Ethernet option when the WAN port is used as a regular Ethernet. The PPPoE choice is for a dial-up connection using PPPoE. If you choose Ethernet in menu 4 you will see the next screen.

3-8

Internet Access