Husqvarna 15V2s AWD manual Presentation

Page 13

PRESENTATION

Presentation

Congratulations on your choice of an excellent quality product that will give you great pleasure for many years. This operator’s manual describes Rider 15V2, Rider 15V2s AWD and Rider 15V2 AWD.

The machines are equipped with a 15 horse power engine from Kawasaki.

The machines are equipped with chronometer and lights.

Rider 15V2 AWD is equipped with all wheel drive. Rider 15V2s AWD is also equipped with power steering.

The power transmission from the engine is handled by a hydrostatic gearbox, which allows variable variation of the speed by using the pedals.

One pedal for driving forward and one for reverse.

Throttle control

The throttle control regulates the engine speed, and thereby also the rotation speed of the blades.

To increase or reduce the engine speed the control is moved forwards or backwards.

Avoid idling the engine for long periods, as there is a risk of carbon build-up on the spark plugs.

Choke control

The choke lever is used for cold starting and to give the engine a richer fuel mixture.

For cold starting the lever is moved backwards to its end position.

Speed limiter

The speed of the machine is steplessly regulated with two pedals. Pedal (1) is used to drive forwards, and pedal (2) to drive backwards.

2 1

WARNING! Make sure that branches do not

!obstruct the pedals when mowing under bushes. Otherwise there is a risk you may lose control.

Parking brake

The parking brake is applied as follows:

1Press down the parking brake pedal (1).

2Press in the lock button (2) on the steering column.

3Release the parking brake pedal while keeping the button pressed in.

The parking brake lock disengages automatically when the brake pedal is pressed.

English – 13

Image 13

Contents English Rider 15V2 Rider 15V2 AWD Rider 15V2s AWDContents Pre-delivery service Service journalAfter the ﬁrst 8 hours Dear Customer IntroductionDriving and transport on public roads TowingSerial Number Good serviceSymbols KEY to SymbolsBrake Starting instructions Safety instructions Safety InstructionsInsure your Rider General useThis is what you do Driving on slopesChildren MaintenanceTransport Location of the controls What is WHAT?Presentation Cutting unit Cutting height adjustment leverLifting lever for the cutting unit LightsFuelling Exercise care and refuel outdoors see safety instructionsRelease lever Release lever Rider 15V2 AWDBefore starting DrivingStart the engine Connecting the jump leads Starting the engine with a weak batteryDriving the Rider Remove the cables in the reverse orderStop the engine Cutting tipsOther objects which can be thrown out by the blades Maintenance schedule MaintenanceChecking and adjusting the steering wires CleaningRemoving of the machine hoods Adjusting the parking brake Rider 15V2 AWD Adjusting the parking brake RiderChecking and adjusting of throttle wire Can result in reduced braking abilityReplacement of fuel ﬁlter Checking and adjusting the choke wireReplacing the air ﬁlter Cool before starting to replace the air ﬁlterChecking the fuel pump’s air ﬁlter Check the level of the battery acid Dry-charged batteryIgnition system Replacing the spark plugCheck the safety system Main fuse Replacing the light bulbsChecking the tyre pressure When the engine is running. Mind your ﬁngersChecking the engine’s cooling air intake Fitting the cutting headTrapping your hand Removing the cutting unitChecking the cutting unit’s parallelism Adjusting the parallelism of the cutting unitReplacing the cutting unit belts Placing in the service position Service position for the cutting unitChecking the blades Restoring from service positionRemoving the BioClip plug Checking the engine’s oil level LubricationChanging the oil ﬁlter Replacing the engine oilChecking the transmission oil level Lubricating the belt adjusterGeneral lubrication Problem Procedure Troubleshooting scheduleStorage ServiceWinter storage GuardTechnical data EC-declaration of conformity Applies to Europe only Page ´z+S!r¶6H¨ Page 1151018-26 ´z+S!r¶6H¨ ´z+S!r¶6H¨