Panasonic EP-MA73 manual Setting up the massage lounger, Where to use the unit, Controller

Page 13

Setting up the massage lounger

1 Where to use the unit

●Ensure there is adequate space to recline.

Keep at least 10 cm (3.9 in.) away from the wall.

Approx. 202 cm (79.5 in.)

Width approx.

Approx. 30 cm

90 cm (35.4 in.)

(11.8 in.)

Approx. 49 cm

 

(19.3 in.)

 

● For details on the dimensions of the unit, see page EN9.

Mat Area where leg rest

Area where unit

could touch the floor

touches the floor

● Do not expose the massage lounger to direct sunlight or high temperatures, such as in front of

heating sources, because this can cause discoloration or hardening of the synthetic leather.

● Place the unit on a mat to prevent floor damage. When placing a mat under the unit, the size of

the mat should be sufficient (at least 120 cm × 70 cm (47.2 in. × 27.6 in.)) to cover the areas

where the unit touches and where the leg rest could touch the floor, as shown in the diagram

on the above.

● Install the unit near a power outlet.

2 Confirm that the main unit and the accessories are in the box.

Main unit

Controller

Accessories ●Pillow

●Armrests (Right/Left)

●Comfort cushion

●Allen key — 1 ●Attachment screws

 

(M6 × 13) — Black

 



(4 pcs.)

(Cross-section)

(M6 × 20) — Silver

 

 

4 mm

 

(2 pcs.)

●Controller stand

Right/Left indication

 

 

Controller

●Lock switch key

 

 

holder

(Back of the armrest)

 

 

 

 

 

 

 

The holes in the fabric

 

 

 

 

at the back of the

●Power

 

Controller

hand & arm massage

cord

holder fixing

section are due to

 

 

screw

This is initially inserted

the manufacturing

 

 

Clip

in the lock switch of the

process and are not a

 

 

 

power switch section

fault.

 

 

 

prior to leaving the

 

 

 

factory.

 

 

 

 

EN14

Page 12 Page 14
Image 13
Page 12 Page 14
Contents EnglishEN3 EspañolSP3 FrançaisFR3 Operating InstructionsContents Important Safety Instructions Safety Precautions Operating Precautions Main functions Weight in box Maximum user weight SpecificationsFront Side Unit dimensionsPart names and functions Power switch section Power cord Power plug Rating sticker Leg coverBack cover Leg rest-Leg & sole massage sectionEN12 Part names and functionsBack intensity displaySee page EN29 Operation displayWhere to use the unit Setting up the massage loungerController Hold onto the sides Removing everything from the box and installing the unitHow to tighten the screws AssemblyAttachment screws positions Insert the armrest into the unitConnect the air plugs Connect the power cord to the unitInsert the power plug into ❶ power outlet AssemblyPlacing the controller Into e controller StandFasten the pillow and the comfort cushion When the controller stand is attached on the left sidePper Check the surrounding area Before sitting downSwitching on the power supply Check the power cord and the power plugCheck the unit Before sitting down（）Make sure there are no tears or rips in the fabric ❷ Make sure there is no foreign matter between the unitAdjust the controller stand Adjust the pillow positionHorizontal orientation can be adjusted Remove the pillowSimple use ❶ Press to turn ❷ Select function massage. the power onStretch Action Select one fromTo adjust to your preferences ❶ Press to turn on the power When you want a complete massagePress one of the buttons With your head on the pillowBody scanning is completed when the tapping action finishes To adjust the shoulder position during the tapping actionWhen performing a massage on shoulder Fine adjustment of the positionHand/arm, lower back or leg/foot Adjust by pressing To repeat the current massageTo adjust the amount of sliding of the sole massage section To adjust the back intensityTo turnHeatmassage heads andFoot HeatOn and Off You can turn on/off theHeatmassage Heads by pressingContents that can be registered When the registration is completedIf there is another setting already To register your preferencesTo delete the registered settings Example PowerTo start the registered program ❶ PressTo turnHeatmassage heads On About theHeatmassage heads/Foot HeatTo turnFoot HeatOn To turnHeatmassage heads OffTo turnHeatmassage heads/Foot Heatoff each time ❸ Select action you prefer ❷ Select the body part you want to massageBody scanning for manual operation ❹ Press to start the actionTo change an action in the middle of a massage If you want to massage with tapping action onlyIt can be adjusted with Using air massage togetherAdding tapping actions to the current operation Adjusting the back intensityTurning theHeatmassage head and Foot HeatOn and Off Massage Select the bodyPress the button For a person with large body dimensionsAlternates Operation of the Hand / ARM Ultra knead on palms massageOperation of the Lower Back massage Operation of the Shoulder massageOperation of the HIP stretch Operation of the Neck stretchOperations of the LEG stretch Press to turn on the power When you want to adjust the reclining angle and/or leg restAfter completing the massage Disconnecting the powerReturning to normal chair position If you experience any problems Timer functionInterrupting the massage Areas covered with synthetic leather Cleaning and maintenancePlastic area How to attach Dry cleaningSeat fabric Sole covers can be removed and washedMoving by lifting it with 2 or more persons Moving the unitHow to remove the armrest Using the castors to move the unitIt is easier to move with the armrest removed Overview of the automatic course About the automatic course/action/voice guidance functionOff Soft Medium Loud Adjusting the voice guidance volumeUsage method Usage situationIs it possible to massage only the upper body or legs? Massaging only the upper bodyHow does body scanning work? Body scanningShoulder position is detected by the following mechanism Upper body massage There is a delay in movement when adjusting the positionHand & arm massages Operating sounds during air MassageLeg rest RecliningController Controller holder is unsteadyIs there a timer function? Noise grows louder after using the chair for a long timeTake the following precautions OtherProblem Cause and Remedy TroubleshootingProblem Troubleshooting（）Sounds and sensations of the unit Error display Contents Error displayPanasonic Corporation of North America
Top Page Image Contents