Panasonic EP-MA73 manual Operating Precautions

Page 5

SAFETY PRECAUTIONS

21.If you have not used the unit for a while, carefully read this operating instructions again and check that the unit is operating normally before use.

Failure to do so may result in accident or injury.

22.Do not use at the same time as another medical device. Doing so may cause an accident or deteriorated health.

23.Do not allow children to use the controller holder fixing screw.

Failure to do so may result in an accident or the child accidentally swallowing the key or screw.

OPERATING PRECAUTIONS

CAUTION: To avoid damaging the chair, follow these precautions:

1.The chair is designed for a maximum user weight of 120 kg (264 lbs). Exceeding the maximum weight may cause permanent damage to the massage mechanism and/or other components of the unit. Any such damage is deemed to be user abuse and is not covered under the Limited Warranty.

2.Do not sit on or drop the controller. Do not pull the controller cord or the power cord. Be careful not to catch the cord of the controller between the armrest and the chair back.

3.Do not treat the chair roughly, such as turning the chair on its side, turning the chair over or standing on it.

4.Do not treat the covering roughly.

Keep sharp or pointed objects away from the covering of the chair. Be careful not to drop lit ashes, lit cigarettes or matches on the chair.

Exposure to direct sunlight can cause fading or a change in color of the covering.

5.Do not repeatedly operate any switch at short intervals. Such action may cause the switch to malfunction.

6.Some noise may be heard coming from the massager while in use. This is due to the structure of the massager and is normal.

7.Make sure there are no obstacles behind the chair before reclining it. The chair can be reclined to a maximum angle of 170˚. If the back hits a wall or pillar, the chair may malfunction. Be sure to have ample space behind the chair. Recline the chair slowly in order to avoid contact with an obstacle.

8.When excessive pressure is applied to the massage heads, they may stop moving for safety. When moving the heads up from the lowered position, ones body weight may stop the headsmovement. In such a case, slightly raise your body and allow the massage heads to move up.

9.Do not sit on the chair with wet body or hair.

10.The unit must not be used inwet rooms(sauna, swimming pool) or outdoors.

11.Always hold the power plug, not the power cord, when unplugging it from a socket. Failure to observe this precaution may result in electric shock or short-circuit.

GROUNDING INSTRUCTIONS

This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated in Figure A. Make sure that the product is connected to an outlet having the same configuration as the plug.

No adapter should be used with this product.

Figure A

GROUNDED

OUTLET

 

 

GROUNDED

EN6

GROUNDING PIN

OUTLET BOX

 

 

 

Image 5
Contents EnglishEN3 EspañolSP3 FrançaisFR3 Operating InstructionsContents Important Safety Instructions Safety Precautions Operating Precautions Main functions Weight in box Maximum user weight SpecificationsFront Side Unit dimensionsPart names and functions Power switch section Power cord Power plug Rating sticker Leg coverBack cover Leg rest-Leg & sole massage sectionEN12 Part names and functionsBack intensity displaySee page EN29 Operation displayController Setting up the massage loungerWhere to use the unit Hold onto the sides Removing everything from the box and installing the unitHow to tighten the screws AssemblyAttachment screws positions Insert the armrest into the unitConnect the air plugs Connect the power cord to the unitInsert the power plug into ❶ power outlet AssemblyPlacing the controller Into e controller StandPper When the controller stand is attached on the left sideFasten the pillow and the comfort cushion Check the surrounding area Before sitting downSwitching on the power supply Check the power cord and the power plugCheck the unit Before sitting down()Make sure there are no tears or rips in the fabric ❷ Make sure there is no foreign matter between the unitAdjust the controller stand Adjust the pillow positionHorizontal orientation can be adjusted Remove the pillowSimple use ❶ Press to turn ❷ Select function massage. the power onStretch Action Select one fromTo adjust to your preferences ❶ Press to turn on the power When you want a complete massagePress one of the buttons With your head on the pillowBody scanning is completed when the tapping action finishes To adjust the shoulder position during the tapping actionWhen performing a massage on shoulder Fine adjustment of the positionHand/arm, lower back or leg/foot Adjust by pressing To repeat the current massageTo adjust the amount of sliding of the sole massage section To adjust the back intensityTo turnHeatmassage heads andFoot HeatOn and Off You can turn on/off theHeatmassage Heads by pressingContents that can be registered When the registration is completedIf there is another setting already To register your preferencesTo delete the registered settings Example PowerTo start the registered program ❶ PressTo turnHeatmassage heads On About theHeatmassage heads/Foot HeatTo turnFoot HeatOn To turnHeatmassage heads OffTo turnHeatmassage heads/Foot Heatoff each time ❸ Select action you prefer ❷ Select the body part you want to massageBody scanning for manual operation ❹ Press to start the actionTo change an action in the middle of a massage If you want to massage with tapping action onlyIt can be adjusted with Using air massage togetherTurning theHeatmassage head and Foot HeatOn and Off Adjusting the back intensityAdding tapping actions to the current operation Massage Select the bodyPress the button For a person with large body dimensionsAlternates Operation of the Hand / ARM Ultra knead on palms massageOperation of the Lower Back massage Operation of the Shoulder massageOperations of the LEG stretch Operation of the Neck stretchOperation of the HIP stretch Press to turn on the power When you want to adjust the reclining angle and/or leg restReturning to normal chair position Disconnecting the powerAfter completing the massage Interrupting the massage Timer functionIf you experience any problems Plastic area Cleaning and maintenanceAreas covered with synthetic leather How to attach Dry cleaningSeat fabric Sole covers can be removed and washedMoving by lifting it with 2 or more persons Moving the unitIt is easier to move with the armrest removed Using the castors to move the unitHow to remove the armrest Overview of the automatic course About the automatic course/action/voice guidance functionOff Soft Medium Loud Adjusting the voice guidance volumeUsage method Usage situationIs it possible to massage only the upper body or legs? Massaging only the upper bodyShoulder position is detected by the following mechanism Body scanningHow does body scanning work? Upper body massage There is a delay in movement when adjusting the positionHand & arm massages Operating sounds during air MassageLeg rest RecliningController Controller holder is unsteadyIs there a timer function? Noise grows louder after using the chair for a long timeTake the following precautions OtherProblem Cause and Remedy TroubleshootingSounds and sensations of the unit Troubleshooting()Problem Error display Contents Error displayPanasonic Corporation of North America