Panasonic Comprehensive Guide to the Massage Chair EP-MA73

Page 48

Using the castors to move the unit

Move the unit by holding onto the side of the leg rest and using the castors.

Hold onto the sides.

Do not hold onto the front side.	Roll the unit slowly
The sole massage section
might slide, and injuries may
occur.
Hold onto the sides of the leg rest.
Lift it no higher
than waist height

Place the controller and power cord on the seat.

The floor may get damaged, so it is	Castors
recommended to place a mat etc. on the floor.

To put the unit down on the floor

●Put the unit down slowly and carefully watch your step.

●Put down the leg rest by holding it with your hands until it has been set on the floor completely.

If you release your hands before the leg rest is fully extended, the leg rest will forcefully return to the initial position.

How to remove the armrest

It is easier to move with the armrest removed.

1Remove the air plugs.

(See step 3 on page EN17.)

2 Remove the attachment screws. (See step 2- ❸ on page EN16.)

3 Slide the armrest forward and pull up with both hands.

Maintenance

EN49

Image 48

Contents Operating Instructions EnglishEN3 EspañolSP3 FrançaisFR3Contents Important Safety Instructions Safety Precautions Operating Precautions Main functions Specifications Weight in box Maximum user weightUnit dimensions Front SidePart names and functions Power cord Power plug Rating sticker Leg cover Power switch sectionBack cover Leg rest-Leg & sole massage sectionPart names and functions EN12Operation display Back intensity displaySee page EN29Setting up the massage lounger Where to use the unitController Removing everything from the box and installing the unit Hold onto the sidesAssembly How to tighten the screwsAttachment screws positions Insert the armrest into the unitConnect the power cord to the unit Connect the air plugsAssembly Insert the power plug into ❶ power outletPlacing the controller Into e controller StandWhen the controller stand is attached on the left side Fasten the pillow and the comfort cushionPper Before sitting down Check the surrounding areaCheck the power cord and the power plug Switching on the power supplyBefore sitting down（） Check the unitMake sure there are no tears or rips in the fabric ❷ Make sure there is no foreign matter between the unitAdjust the pillow position Adjust the controller standHorizontal orientation can be adjusted Remove the pillow❶ Press to turn ❷ Select function massage. the power on Simple useStretch Action Select one fromTo adjust to your preferences When you want a complete massage ❶ Press to turn on the powerPress one of the buttons With your head on the pillowTo adjust the shoulder position during the tapping action Body scanning is completed when the tapping action finishesFine adjustment of the position When performing a massage on shoulderHand/arm, lower back or leg/foot Adjust by pressing To repeat the current massageTo adjust the back intensity To adjust the amount of sliding of the sole massage sectionTo turnHeatmassage heads andFoot HeatOn and Off You can turn on/off theHeatmassage Heads by pressingWhen the registration is completed Contents that can be registeredIf there is another setting already To register your preferencesPower To delete the registered settings ExampleTo start the registered program ❶ PressAbout theHeatmassage heads/Foot Heat To turnHeatmassage heads OnTo turnFoot HeatOn To turnHeatmassage heads OffTo turnHeatmassage heads/Foot Heatoff each time ❷ Select the body part you want to massage ❸ Select action you prefer❹ Press to start the action Body scanning for manual operationTo change an action in the middle of a massage If you want to massage with tapping action onlyUsing air massage together It can be adjusted withAdjusting the back intensity Adding tapping actions to the current operationTurning theHeatmassage head and Foot HeatOn and Off Select the body MassageFor a person with large body dimensions Press the buttonOperation of the Hand / ARM Ultra knead on palms massage AlternatesOperation of the Shoulder massage Operation of the Lower Back massageOperation of the Neck stretch Operation of the HIP stretchOperations of the LEG stretch When you want to adjust the reclining angle and/or leg rest Press to turn on the powerDisconnecting the power After completing the massageReturning to normal chair position Timer function If you experience any problemsInterrupting the massage Cleaning and maintenance Areas covered with synthetic leatherPlastic area Dry cleaning How to attachSeat fabric Sole covers can be removed and washedMoving the unit Moving by lifting it with 2 or more personsUsing the castors to move the unit How to remove the armrestIt is easier to move with the armrest removed About the automatic course/action/voice guidance function Overview of the automatic courseAdjusting the voice guidance volume Off Soft Medium LoudUsage situation Usage methodIs it possible to massage only the upper body or legs? Massaging only the upper bodyBody scanning How does body scanning work?Shoulder position is detected by the following mechanism There is a delay in movement when adjusting the position Upper body massageHand & arm massages Operating sounds during air MassageReclining Leg restController Controller holder is unsteadyNoise grows louder after using the chair for a long time Is there a timer function?Take the following precautions OtherTroubleshooting Problem Cause and RemedyTroubleshooting（） ProblemSounds and sensations of the unit Error display Error display ContentsPanasonic Corporation of North America