Panasonic EP-MA73 manual When the controller stand is attached on the left side, Pper

Page 18

When the controller stand is attached on the left side

●Run the controller cord to the left.

①Press on the controller to turn on the power.

②Press on the controller and hold until the leg rest has risen as far as it will go.

・Continue pressing until a“beep-beep-beep”sound is heard.

③Disconnect the controller cord.

・Hook is released by pressing on the tab on the fastening band with your fingers.

④Move the controller cord under the leg rest to the left side.

⑤Fasten the controller cord.

・Press down from the edge if it does not fit in easily. ⑥Insert the tip of the fastening band into the hole.

●The controller cord is fastened to the right side prior to leaving the factory.

Fastening band

Fasten to the right side

	③	③
	③	Tab
		Tab

Controller cord

④

Leg rest

②

View from front

Cord-holder groove

⑤●

●⑥ Controller cord

Before Use

7Fasten the pillow and the comfort cushion.

❶● Fasten the pillow using			❷● Fasten the comfort cushion using
the		steners.	the pper.
●	See	page EN23 for guidelines
	on positioning the pillow
	during the massage.
Fasteners		Fasteners	Zipper

Comfort cushion

Pillow

EN19

Image 18

Contents Operating Instructions EnglishEN3 EspañolSP3 FrançaisFR3Contents Important Safety Instructions Safety Precautions Operating Precautions Main functions Specifications Weight in box Maximum user weightUnit dimensions Front SidePart names and functions Back cover Power cord Power plug Rating sticker Leg coverPower switch section Leg rest-Leg & sole massage sectionPart names and functions EN12Operation display Back intensity displaySee page EN29Setting up the massage lounger Where to use the unitController Removing everything from the box and installing the unit Hold onto the sidesAttachment screws positions AssemblyHow to tighten the screws Insert the armrest into the unitConnect the power cord to the unit Connect the air plugsPlacing the controller AssemblyInsert the power plug into ❶ power outlet Into e controller StandWhen the controller stand is attached on the left side Fasten the pillow and the comfort cushionPper Before sitting down Check the surrounding areaCheck the power cord and the power plug Switching on the power supplyMake sure there are no tears or rips in the fabric Before sitting down（）Check the unit ❷ Make sure there is no foreign matter between the unitHorizontal orientation can be adjusted Adjust the pillow positionAdjust the controller stand Remove the pillowStretch Action ❶ Press to turn ❷ Select function massage. the power onSimple use Select one fromTo adjust to your preferences Press one of the buttons When you want a complete massage❶ Press to turn on the power With your head on the pillowTo adjust the shoulder position during the tapping action Body scanning is completed when the tapping action finishesHand/arm, lower back or leg/foot Adjust by pressing Fine adjustment of the positionWhen performing a massage on shoulder To repeat the current massageTo turnHeatmassage heads andFoot HeatOn and Off To adjust the back intensityTo adjust the amount of sliding of the sole massage section You can turn on/off theHeatmassage Heads by pressingIf there is another setting already When the registration is completedContents that can be registered To register your preferencesTo start the registered program PowerTo delete the registered settings Example ❶ PressTo turnFoot HeatOn About theHeatmassage heads/Foot HeatTo turnHeatmassage heads On To turnHeatmassage heads OffTo turnHeatmassage heads/Foot Heatoff each time ❷ Select the body part you want to massage ❸ Select action you preferTo change an action in the middle of a massage ❹ Press to start the actionBody scanning for manual operation If you want to massage with tapping action onlyUsing air massage together It can be adjusted withAdjusting the back intensity Adding tapping actions to the current operationTurning theHeatmassage head and Foot HeatOn and Off Select the body MassageFor a person with large body dimensions Press the buttonOperation of the Hand / ARM Ultra knead on palms massage AlternatesOperation of the Shoulder massage Operation of the Lower Back massageOperation of the Neck stretch Operation of the HIP stretchOperations of the LEG stretch When you want to adjust the reclining angle and/or leg rest Press to turn on the powerDisconnecting the power After completing the massageReturning to normal chair position Timer function If you experience any problemsInterrupting the massage Cleaning and maintenance Areas covered with synthetic leatherPlastic area Seat fabric Dry cleaningHow to attach Sole covers can be removed and washedMoving the unit Moving by lifting it with 2 or more personsUsing the castors to move the unit How to remove the armrestIt is easier to move with the armrest removed About the automatic course/action/voice guidance function Overview of the automatic courseAdjusting the voice guidance volume Off Soft Medium LoudIs it possible to massage only the upper body or legs? Usage situationUsage method Massaging only the upper bodyBody scanning How does body scanning work?Shoulder position is detected by the following mechanism Hand & arm massages There is a delay in movement when adjusting the positionUpper body massage Operating sounds during air MassageController RecliningLeg rest Controller holder is unsteadyTake the following precautions Noise grows louder after using the chair for a long timeIs there a timer function? OtherTroubleshooting Problem Cause and RemedyTroubleshooting（） ProblemSounds and sensations of the unit Error display Error display ContentsPanasonic Corporation of North America