Panasonic EP-MA73 Assembly, Placing the controller, Insert the power plug into ❶ power outlet

Page 17

Assembly
	（Continued）
5	Turn on the power and raise the backrest to the upright position.
	Insert the power plug into the	❶●
	❶● power outlet.

●Always be sure to insert into an AC 120 V plug.

❷● Confirm the lock switch key is set to the“open”position.

❸● Confirm the power switch is
set to the“on”position.
●❹ Press	●❷	❸●
	on the controller twice.
●Press once, and then press again approx. 1 second later.
rest will rise automatically.

6	Placing the controller
6	●❶ Placing the controller	●❶
	into e controller

stand.

❷● Fasten the controller cord sing the clip.

●Fasten so the cable under the clip will not sag too much with the backrest raised.

(Because there is a chance of the cord becoming tangled with your feet, etc.)

❷●

EN18

Image 17

Contents EnglishEN3 EspañolSP3 FrançaisFR3 Operating InstructionsContents Important Safety Instructions Safety Precautions Operating Precautions Main functions Weight in box Maximum user weight SpecificationsFront Side Unit dimensionsPart names and functions Power switch section Power cord Power plug Rating sticker Leg coverBack cover Leg rest-Leg & sole massage sectionEN12 Part names and functionsBack intensity displaySee page EN29 Operation displayController Setting up the massage loungerWhere to use the unit Hold onto the sides Removing everything from the box and installing the unitHow to tighten the screws AssemblyAttachment screws positions Insert the armrest into the unitConnect the air plugs Connect the power cord to the unitInsert the power plug into ❶ power outlet AssemblyPlacing the controller Into e controller StandPper When the controller stand is attached on the left sideFasten the pillow and the comfort cushion Check the surrounding area Before sitting downSwitching on the power supply Check the power cord and the power plugCheck the unit Before sitting down（）Make sure there are no tears or rips in the fabric ❷ Make sure there is no foreign matter between the unitAdjust the controller stand Adjust the pillow positionHorizontal orientation can be adjusted Remove the pillowSimple use ❶ Press to turn ❷ Select function massage. the power onStretch Action Select one fromTo adjust to your preferences ❶ Press to turn on the power When you want a complete massagePress one of the buttons With your head on the pillowBody scanning is completed when the tapping action finishes To adjust the shoulder position during the tapping actionWhen performing a massage on shoulder Fine adjustment of the positionHand/arm, lower back or leg/foot Adjust by pressing To repeat the current massageTo adjust the amount of sliding of the sole massage section To adjust the back intensityTo turnHeatmassage heads andFoot HeatOn and Off You can turn on/off theHeatmassage Heads by pressingContents that can be registered When the registration is completedIf there is another setting already To register your preferencesTo delete the registered settings Example PowerTo start the registered program ❶ PressTo turnHeatmassage heads On About theHeatmassage heads/Foot HeatTo turnFoot HeatOn To turnHeatmassage heads OffTo turnHeatmassage heads/Foot Heatoff each time ❸ Select action you prefer ❷ Select the body part you want to massageBody scanning for manual operation ❹ Press to start the actionTo change an action in the middle of a massage If you want to massage with tapping action onlyIt can be adjusted with Using air massage togetherTurning theHeatmassage head and Foot HeatOn and Off Adjusting the back intensityAdding tapping actions to the current operation Massage Select the bodyPress the button For a person with large body dimensionsAlternates Operation of the Hand / ARM Ultra knead on palms massageOperation of the Lower Back massage Operation of the Shoulder massageOperations of the LEG stretch Operation of the Neck stretchOperation of the HIP stretch Press to turn on the power When you want to adjust the reclining angle and/or leg restReturning to normal chair position Disconnecting the powerAfter completing the massage Interrupting the massage Timer functionIf you experience any problems Plastic area Cleaning and maintenanceAreas covered with synthetic leather How to attach Dry cleaningSeat fabric Sole covers can be removed and washedMoving by lifting it with 2 or more persons Moving the unitIt is easier to move with the armrest removed Using the castors to move the unitHow to remove the armrest Overview of the automatic course About the automatic course/action/voice guidance functionOff Soft Medium Loud Adjusting the voice guidance volumeUsage method Usage situationIs it possible to massage only the upper body or legs? Massaging only the upper bodyShoulder position is detected by the following mechanism Body scanningHow does body scanning work? Upper body massage There is a delay in movement when adjusting the positionHand & arm massages Operating sounds during air MassageLeg rest RecliningController Controller holder is unsteadyIs there a timer function? Noise grows louder after using the chair for a long timeTake the following precautions OtherProblem Cause and Remedy TroubleshootingSounds and sensations of the unit Troubleshooting（）Problem Error display Contents Error displayPanasonic Corporation of North America

Assembly

Insert the power plug into the

❶● power outlet.

Placing the controller

into e controller

stand.

❷● Fasten the controller cord sing the clip.