Approximately 30 seconds after the body scanning starts, the massage heads slowly lower to the shoulder position, and a soft tapping action begins to determine your shoulder position.
Massage head
Tapping action
●Air in the seat will operate so the body will not shift during the body scanning.
●Keep your head on the pillow until the soft tapping action begins. Lifting your head from the pillow will result in incorrect determination of the shoulder position.
To adjust the shoulder position during the tapping action
●When the shoulder position is incorrect, adjust then shoulder position while the soft tapping action is in progress (for approximately 12 seconds), and use the POSITION button to move the massage heads up or down and then press 
.
How to Use
A single press of the button will raise or lower the massage heads approximately 1.2 cm (0.5 in.).
Too high
Correct position of the massage head (The point where the tapping action should be felt.)
Too low
Body scanning is completed when the tapping action finishes.
●If you press 
while the tapping action is still going on, it will end the body scanning and the massage will start.
●The leg rest may adjust automatically so that the soles of the feet touch the sole massage section according to your estimated height based on the shoulder position.
●If the shoulder position is off drastically, turn the power off once, and repeat from step ❶ with shoulder firmly pressed against the backrest.
▶Continued on the next page EN27