Panasonic EP-MA73 manual Error display Contents

Page 58

Error display

Contents of the error will be displayed in the remaining time display area when an error occurs during the operation.

Remaining time							<Example of error display>
Remaining time							<Example of error display>
display							●For the error“U10”


							,	will flash alternately.



Error display							Contents

				For safety reasons, operation will terminate automatically
				when it cannot detect if someone is seated. If this error occurs
				even if you are seated, press				, sit back all the way to the
				backrest, and operate from the start again.


				Operation is terminated because there is a problem with
				internal communication.

Operation is terminated because there is a problem with the massage mechanism.

Operation except for the massage mechanism is terminated because there is a problem with the reclining mechanism or the raise/lowering mechanism of the leg rest.

Please contact an authorized service center. (See the warranty card for the contact number.*) Service and maintenance will be carried out smoother if the error number is communicated when contacting.

* Only for USA and Puerto Rico

Q&A/Important Notes

EN59

Image 58

Contents Operating Instructions EnglishEN3 EspañolSP3 FrançaisFR3Contents Important Safety Instructions Safety Precautions Operating Precautions Main functions Specifications Weight in box Maximum user weightUnit dimensions Front SidePart names and functions Back cover Power cord Power plug Rating sticker Leg coverPower switch section Leg rest-Leg & sole massage sectionPart names and functions EN12Operation display Back intensity displaySee page EN29Where to use the unit Setting up the massage loungerController Removing everything from the box and installing the unit Hold onto the sidesAttachment screws positions AssemblyHow to tighten the screws Insert the armrest into the unitConnect the power cord to the unit Connect the air plugsPlacing the controller AssemblyInsert the power plug into ❶ power outlet Into e controller StandFasten the pillow and the comfort cushion When the controller stand is attached on the left sidePper Before sitting down Check the surrounding areaCheck the power cord and the power plug Switching on the power supplyMake sure there are no tears or rips in the fabric Before sitting down（）Check the unit ❷ Make sure there is no foreign matter between the unitHorizontal orientation can be adjusted Adjust the pillow positionAdjust the controller stand Remove the pillowStretch Action ❶ Press to turn ❷ Select function massage. the power onSimple use Select one fromTo adjust to your preferences Press one of the buttons When you want a complete massage❶ Press to turn on the power With your head on the pillowTo adjust the shoulder position during the tapping action Body scanning is completed when the tapping action finishesHand/arm, lower back or leg/foot Adjust by pressing Fine adjustment of the positionWhen performing a massage on shoulder To repeat the current massageTo turnHeatmassage heads andFoot HeatOn and Off To adjust the back intensityTo adjust the amount of sliding of the sole massage section You can turn on/off theHeatmassage Heads by pressingIf there is another setting already When the registration is completedContents that can be registered To register your preferencesTo start the registered program PowerTo delete the registered settings Example ❶ PressTo turnFoot HeatOn About theHeatmassage heads/Foot HeatTo turnHeatmassage heads On To turnHeatmassage heads OffTo turnHeatmassage heads/Foot Heatoff each time ❷ Select the body part you want to massage ❸ Select action you preferTo change an action in the middle of a massage ❹ Press to start the actionBody scanning for manual operation If you want to massage with tapping action onlyUsing air massage together It can be adjusted withAdding tapping actions to the current operation Adjusting the back intensityTurning theHeatmassage head and Foot HeatOn and Off Select the body MassageFor a person with large body dimensions Press the buttonOperation of the Hand / ARM Ultra knead on palms massage AlternatesOperation of the Shoulder massage Operation of the Lower Back massageOperation of the HIP stretch Operation of the Neck stretchOperations of the LEG stretch When you want to adjust the reclining angle and/or leg rest Press to turn on the powerAfter completing the massage Disconnecting the powerReturning to normal chair position If you experience any problems Timer functionInterrupting the massage Areas covered with synthetic leather Cleaning and maintenancePlastic area Seat fabric Dry cleaningHow to attach Sole covers can be removed and washedMoving the unit Moving by lifting it with 2 or more personsHow to remove the armrest Using the castors to move the unitIt is easier to move with the armrest removed About the automatic course/action/voice guidance function Overview of the automatic courseAdjusting the voice guidance volume Off Soft Medium LoudIs it possible to massage only the upper body or legs? Usage situationUsage method Massaging only the upper bodyHow does body scanning work? Body scanningShoulder position is detected by the following mechanism Hand & arm massages There is a delay in movement when adjusting the positionUpper body massage Operating sounds during air MassageController RecliningLeg rest Controller holder is unsteadyTake the following precautions Noise grows louder after using the chair for a long timeIs there a timer function? OtherTroubleshooting Problem Cause and RemedyProblem Troubleshooting（）Sounds and sensations of the unit Error display Error display ContentsPanasonic Corporation of North America