Panasonic EP-MA73 manual After completing the massage, Returning to normal chair position

Page 43

After completing the massage

1

2

Returning to normal chair position

Hang the comfort cushion on the backrest.

Store the leg rest.

While raising the leg rest rotation lock release lever in the

 

direction of the arrow.

 

Rotate from top.

 

Rotate until it stops rotating.

 

Let go of the leg rest rotation lock release lever.

 

Check that the leg rest does not rotate.

WARNING

 

Sit on the unit after confirming there is no foreign matter between the parts of the unit. (Confirm that there are no foreign objects stuck in the comfort cushion, leg rest or hand & arm massage section.) Sit down and ensure that the leg rest is properly locked in place.

Failure to observe this precaution may result in accident or injury.

Press firmly.

Let go.

Disconnecting the power

1 Slide the power switch to theoffposition.

2 lock switch

power

2 Turn the lock switch key to the

open

 

lock

off on

1

lockposition and remove it.

Power switch

WARNING

section

 

Remove the power plug

 

After each massage, slide the power switch,

3 from the electrical outlet.

 

which is located on the right side of the chair,

 

 

to theoffposition and turn its lock switch

The lock switch key

 

to thelockposition and remove the key and

4 must be stored out of

 

power plug.

 

the reach of children.

EN44

Image 43
Contents EnglishEN3 EspañolSP3 FrançaisFR3 Operating InstructionsContents Important Safety Instructions Safety Precautions Operating Precautions Main functions Weight in box Maximum user weight SpecificationsFront Side Unit dimensionsPart names and functions Leg rest-Leg & sole massage section Power cord Power plug Rating sticker Leg coverPower switch section Back coverEN12 Part names and functionsBack intensity displaySee page EN29 Operation displayWhere to use the unit Setting up the massage loungerController Hold onto the sides Removing everything from the box and installing the unitInsert the armrest into the unit AssemblyHow to tighten the screws Attachment screws positionsConnect the air plugs Connect the power cord to the unitInto e controller Stand AssemblyInsert the power plug into ❶ power outlet Placing the controllerFasten the pillow and the comfort cushion When the controller stand is attached on the left sidePper Check the surrounding area Before sitting downSwitching on the power supply Check the power cord and the power plug❷ Make sure there is no foreign matter between the unit Before sitting down()Check the unit Make sure there are no tears or rips in the fabricRemove the pillow Adjust the pillow positionAdjust the controller stand Horizontal orientation can be adjustedSelect one from ❶ Press to turn ❷ Select function massage. the power onSimple use Stretch ActionTo adjust to your preferences With your head on the pillow When you want a complete massage❶ Press to turn on the power Press one of the buttonsBody scanning is completed when the tapping action finishes To adjust the shoulder position during the tapping actionTo repeat the current massage Fine adjustment of the positionWhen performing a massage on shoulder Hand/arm, lower back or leg/foot Adjust by pressingYou can turn on/off theHeatmassage Heads by pressing To adjust the back intensityTo adjust the amount of sliding of the sole massage section To turnHeatmassage heads andFoot HeatOn and OffTo register your preferences When the registration is completedContents that can be registered If there is another setting already❶ Press PowerTo delete the registered settings Example To start the registered programTo turnHeatmassage heads Off About theHeatmassage heads/Foot HeatTo turnHeatmassage heads On To turnFoot HeatOnTo turnHeatmassage heads/Foot Heatoff each time ❸ Select action you prefer ❷ Select the body part you want to massageIf you want to massage with tapping action only ❹ Press to start the actionBody scanning for manual operation To change an action in the middle of a massageIt can be adjusted with Using air massage togetherAdding tapping actions to the current operation Adjusting the back intensityTurning theHeatmassage head and Foot HeatOn and Off Massage Select the bodyPress the button For a person with large body dimensionsAlternates Operation of the Hand / ARM Ultra knead on palms massageOperation of the Lower Back massage Operation of the Shoulder massageOperation of the HIP stretch Operation of the Neck stretchOperations of the LEG stretch Press to turn on the power When you want to adjust the reclining angle and/or leg restAfter completing the massage Disconnecting the powerReturning to normal chair position If you experience any problems Timer functionInterrupting the massage Areas covered with synthetic leather Cleaning and maintenancePlastic area Sole covers can be removed and washed Dry cleaningHow to attach Seat fabricMoving by lifting it with 2 or more persons Moving the unitHow to remove the armrest Using the castors to move the unitIt is easier to move with the armrest removed Overview of the automatic course About the automatic course/action/voice guidance functionOff Soft Medium Loud Adjusting the voice guidance volumeMassaging only the upper body Usage situationUsage method Is it possible to massage only the upper body or legs?How does body scanning work? Body scanningShoulder position is detected by the following mechanism Operating sounds during air Massage There is a delay in movement when adjusting the positionUpper body massage Hand & arm massagesController holder is unsteady RecliningLeg rest ControllerOther Noise grows louder after using the chair for a long timeIs there a timer function? Take the following precautionsProblem Cause and Remedy TroubleshootingProblem Troubleshooting()Sounds and sensations of the unit Error display Contents Error displayPanasonic Corporation of North America