Panasonic EP-MA73 manual Check the power cord and the power plug, Switching on the power supply

Page 20

3Check the power cord and the power plug.

WARNING

●Periodically remove dust, etc. from the power plug. Failure to do so may result in insulation failure due to humidity, etc., which may cause fire. (Remove dust using a dry cloth.）

●Never operate the unit if it has a damaged power cord or plug. Return the unit to the nearest authorized service center if it is not working properly, if it has been dropped or damaged, or if it has been immersed in water.

●Keep power cords away from heated surfaces.

Do not carry the unit by the power cord.

Be careful not to trip over the power cord.

Be sure to push the connector all the way into the appliance inlet.

Before Use

4Switching on the power supply


●❶ Insert the power plug into an electrical outlet.				●❶
●❷		he lock switch key to the“open”position.
	Turn
●❸			the power switch to the“on”position.
	Slide

WARNING

●Fully insert the power plug to reduce the risk of short-circuit and fire.

●Always use sockets and wiring devices at the correct rated value.

●Use at the specified power supply 120 V, AC. Failure to do so may result in electric shock or fire due to overheating.

●Do not insert or unplug the power plug with wet hands.

Doing so may cause electric shock.

lock switch power

	open
	●❷ lock	off on
	●❷ lock	❸●
		❸●

▶Continued on the next page EN21

Image 20

Contents Operating Instructions EnglishEN3 EspañolSP3 FrançaisFR3Contents Important Safety Instructions Safety Precautions Operating Precautions Main functions Specifications Weight in box Maximum user weightUnit dimensions Front SidePart names and functions Power cord Power plug Rating sticker Leg cover Power switch sectionBack cover Leg rest-Leg & sole massage sectionPart names and functions EN12Operation display Back intensity displaySee page EN29Controller Setting up the massage loungerWhere to use the unit Removing everything from the box and installing the unit Hold onto the sidesAssembly How to tighten the screwsAttachment screws positions Insert the armrest into the unitConnect the power cord to the unit Connect the air plugsAssembly Insert the power plug into ❶ power outletPlacing the controller Into e controller StandPper When the controller stand is attached on the left sideFasten the pillow and the comfort cushion Before sitting down Check the surrounding areaCheck the power cord and the power plug Switching on the power supplyBefore sitting down（） Check the unitMake sure there are no tears or rips in the fabric ❷ Make sure there is no foreign matter between the unitAdjust the pillow position Adjust the controller standHorizontal orientation can be adjusted Remove the pillow❶ Press to turn ❷ Select function massage. the power on Simple useStretch Action Select one fromTo adjust to your preferences When you want a complete massage ❶ Press to turn on the powerPress one of the buttons With your head on the pillowTo adjust the shoulder position during the tapping action Body scanning is completed when the tapping action finishesFine adjustment of the position When performing a massage on shoulderHand/arm, lower back or leg/foot Adjust by pressing To repeat the current massageTo adjust the back intensity To adjust the amount of sliding of the sole massage sectionTo turnHeatmassage heads andFoot HeatOn and Off You can turn on/off theHeatmassage Heads by pressingWhen the registration is completed Contents that can be registeredIf there is another setting already To register your preferencesPower To delete the registered settings ExampleTo start the registered program ❶ PressAbout theHeatmassage heads/Foot Heat To turnHeatmassage heads OnTo turnFoot HeatOn To turnHeatmassage heads OffTo turnHeatmassage heads/Foot Heatoff each time ❷ Select the body part you want to massage ❸ Select action you prefer❹ Press to start the action Body scanning for manual operationTo change an action in the middle of a massage If you want to massage with tapping action onlyUsing air massage together It can be adjusted withTurning theHeatmassage head and Foot HeatOn and Off Adjusting the back intensityAdding tapping actions to the current operation Select the body MassageFor a person with large body dimensions Press the buttonOperation of the Hand / ARM Ultra knead on palms massage AlternatesOperation of the Shoulder massage Operation of the Lower Back massageOperations of the LEG stretch Operation of the Neck stretchOperation of the HIP stretch When you want to adjust the reclining angle and/or leg rest Press to turn on the powerReturning to normal chair position Disconnecting the powerAfter completing the massage Interrupting the massage Timer functionIf you experience any problems Plastic area Cleaning and maintenanceAreas covered with synthetic leather Dry cleaning How to attachSeat fabric Sole covers can be removed and washedMoving the unit Moving by lifting it with 2 or more personsIt is easier to move with the armrest removed Using the castors to move the unitHow to remove the armrest About the automatic course/action/voice guidance function Overview of the automatic courseAdjusting the voice guidance volume Off Soft Medium LoudUsage situation Usage methodIs it possible to massage only the upper body or legs? Massaging only the upper bodyShoulder position is detected by the following mechanism Body scanningHow does body scanning work? There is a delay in movement when adjusting the position Upper body massageHand & arm massages Operating sounds during air MassageReclining Leg restController Controller holder is unsteadyNoise grows louder after using the chair for a long time Is there a timer function?Take the following precautions OtherTroubleshooting Problem Cause and RemedySounds and sensations of the unit Troubleshooting（）Problem Error display Error display ContentsPanasonic Corporation of North America