Panasonic EP-MA73 manual Assembly, Attachment screws positions, How to tighten the screws

Page 15

Assembly

Attaching the controller stand to the right or left side panel of this unit
1Fasten the controller stand with the		<When attaching on the right side panel>
attachment screws. (4 positions)
Use this screw … Attachment screws (M6 × 13)
× 4 pcs. (Black)
How to tighten the screws		●Align the 2 prongs of the
Attachment screw		●Align the 2 prongs of the	Controller
Hole	●Tighten the 4 screws	side panel with the holes	Stand
Hole	lightly using your fingers.	of the controller stand.
	lightly using your fingers.	of the controller stand.
	(Make the screws level
	with the holes.)
Allen key	●Tighten firmly with the allen key.
	●Screw may be damaged if
	you tighten the screw inserted
	into the hole crookedly using
	an allen key.

2	Fasten the armrest with the attachment screws. (On both the right and left sides)
	❶●	Insert the armrest into the unit.	<When attaching the right armrest>
		●“R” right side) and“L”(left side) are indicated	●❶	Front
		at the bottom of the armrest.

●Insert the armrest from the top aligning the ▲ marks on the side of the armrest.

●Be careful to avoid pinching your fingers and air plugs.

❷● Slide the armrest toward the back while pushing it downward.

Back

●❸ Fasten the armrest with the attachment
screws. (One position for each side)		Align the ▲
Use this screw … Attachment screws (M6 × 20)		marks.
	× 2 pcs. (Silver)
How to tighten the screws		●❷
	●Put an attachment screw
	on the edge of the allen	❸●
Allen key	key and tighten the screw
	horizontally to the hole.
	●Screw may be damaged
	if you tighten the screw
	inserted into the hole
	crookedly using an allen key.

EN16

Image 15

Contents EnglishEN3 EspañolSP3 FrançaisFR3 Operating InstructionsContents Important Safety Instructions Safety Precautions Operating Precautions Main functions Weight in box Maximum user weight SpecificationsFront Side Unit dimensionsPart names and functions Leg rest-Leg & sole massage section Power cord Power plug Rating sticker Leg coverPower switch section Back coverEN12 Part names and functions Back intensity displaySee page EN29 Operation displaySetting up the massage lounger Where to use the unitController Hold onto the sides Removing everything from the box and installing the unitInsert the armrest into the unit AssemblyHow to tighten the screws Attachment screws positionsConnect the air plugs Connect the power cord to the unitInto e controller Stand AssemblyInsert the power plug into ❶ power outlet Placing the controllerWhen the controller stand is attached on the left side Fasten the pillow and the comfort cushionPper Check the surrounding area Before sitting downSwitching on the power supply Check the power cord and the power plug❷ Make sure there is no foreign matter between the unit Before sitting down（）Check the unit Make sure there are no tears or rips in the fabricRemove the pillow Adjust the pillow positionAdjust the controller stand Horizontal orientation can be adjustedSelect one from ❶ Press to turn ❷ Select function massage. the power onSimple use Stretch ActionTo adjust to your preferences With your head on the pillow When you want a complete massage❶ Press to turn on the power Press one of the buttonsBody scanning is completed when the tapping action finishes To adjust the shoulder position during the tapping actionTo repeat the current massage Fine adjustment of the positionWhen performing a massage on shoulder Hand/arm, lower back or leg/foot Adjust by pressingYou can turn on/off theHeatmassage Heads by pressing To adjust the back intensityTo adjust the amount of sliding of the sole massage section To turnHeatmassage heads andFoot HeatOn and OffTo register your preferences When the registration is completedContents that can be registered If there is another setting already❶ Press PowerTo delete the registered settings Example To start the registered programTo turnHeatmassage heads Off About theHeatmassage heads/Foot HeatTo turnHeatmassage heads On To turnFoot HeatOnTo turnHeatmassage heads/Foot Heatoff each time ❸ Select action you prefer ❷ Select the body part you want to massageIf you want to massage with tapping action only ❹ Press to start the actionBody scanning for manual operation To change an action in the middle of a massageIt can be adjusted with Using air massage togetherAdjusting the back intensity Adding tapping actions to the current operationTurning theHeatmassage head and Foot HeatOn and Off Massage Select the bodyPress the button For a person with large body dimensionsAlternates Operation of the Hand / ARM Ultra knead on palms massageOperation of the Lower Back massage Operation of the Shoulder massageOperation of the Neck stretch Operation of the HIP stretchOperations of the LEG stretch Press to turn on the power When you want to adjust the reclining angle and/or leg restDisconnecting the power After completing the massageReturning to normal chair position Timer function If you experience any problemsInterrupting the massage Cleaning and maintenance Areas covered with synthetic leatherPlastic area Sole covers can be removed and washed Dry cleaningHow to attach Seat fabricMoving by lifting it with 2 or more persons Moving the unitUsing the castors to move the unit How to remove the armrestIt is easier to move with the armrest removed Overview of the automatic course About the automatic course/action/voice guidance functionOff Soft Medium Loud Adjusting the voice guidance volumeMassaging only the upper body Usage situationUsage method Is it possible to massage only the upper body or legs?Body scanning How does body scanning work?Shoulder position is detected by the following mechanism Operating sounds during air Massage There is a delay in movement when adjusting the positionUpper body massage Hand & arm massagesController holder is unsteady RecliningLeg rest ControllerOther Noise grows louder after using the chair for a long timeIs there a timer function? Take the following precautionsProblem Cause and Remedy TroubleshootingTroubleshooting（） ProblemSounds and sensations of the unit Error display Contents Error displayPanasonic Corporation of North America