Panasonic EP-MA73 manual Connect the air plugs, Connect the power cord to the unit

Page 16

3

4

Connect the air plugs

①Press air plugs into the air plug sockets below the armrest until you hear a click.

	View from bottom		Before
	View from bottom
		Air plug jack	Use
Front		Air plug	Use
Front

		Protrusion
	Press until the protrusion clicks
	into place.

・Arm massage will not operate unless the air plugs are inserted securely. ②Follow the same step when connecting to the armrest on the left side.

Connect the power cord to the unit

Appliance inlet

Connector

Power cord

Power switch section

❶● Check for dirt and damage on appliance inlet of the power switch

on and the connector of the power cord.

❷● Insert the connector into the appliance inlet.

●❸ Be re to push the connector in all the ay.

GROUNDING INSTRUCTIONS

●The unit must be properly grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current in order to reduce the risk of electric shock.

●This unit is equipped with a cord with an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that has been properly installed in accordance with all local codes and ordinances.

▶Continued on the next page EN17

Image 16

Contents Operating Instructions EnglishEN3 EspañolSP3 FrançaisFR3Contents Important Safety Instructions Safety Precautions Operating Precautions Main functions Specifications Weight in box Maximum user weightUnit dimensions Front SidePart names and functions Power cord Power plug Rating sticker Leg cover Power switch sectionBack cover Leg rest-Leg & sole massage sectionPart names and functions EN12Operation display Back intensity displaySee page EN29Where to use the unit Setting up the massage loungerController Removing everything from the box and installing the unit Hold onto the sidesAssembly How to tighten the screwsAttachment screws positions Insert the armrest into the unitConnect the power cord to the unit Connect the air plugsAssembly Insert the power plug into ❶ power outletPlacing the controller Into e controller StandFasten the pillow and the comfort cushion When the controller stand is attached on the left sidePper Before sitting down Check the surrounding areaCheck the power cord and the power plug Switching on the power supplyBefore sitting down（） Check the unitMake sure there are no tears or rips in the fabric ❷ Make sure there is no foreign matter between the unitAdjust the pillow position Adjust the controller standHorizontal orientation can be adjusted Remove the pillow❶ Press to turn ❷ Select function massage. the power on Simple useStretch Action Select one fromTo adjust to your preferences When you want a complete massage ❶ Press to turn on the powerPress one of the buttons With your head on the pillowTo adjust the shoulder position during the tapping action Body scanning is completed when the tapping action finishesFine adjustment of the position When performing a massage on shoulderHand/arm, lower back or leg/foot Adjust by pressing To repeat the current massageTo adjust the back intensity To adjust the amount of sliding of the sole massage sectionTo turnHeatmassage heads andFoot HeatOn and Off You can turn on/off theHeatmassage Heads by pressingWhen the registration is completed Contents that can be registeredIf there is another setting already To register your preferencesPower To delete the registered settings ExampleTo start the registered program ❶ PressAbout theHeatmassage heads/Foot Heat To turnHeatmassage heads OnTo turnFoot HeatOn To turnHeatmassage heads OffTo turnHeatmassage heads/Foot Heatoff each time ❷ Select the body part you want to massage ❸ Select action you prefer❹ Press to start the action Body scanning for manual operationTo change an action in the middle of a massage If you want to massage with tapping action onlyUsing air massage together It can be adjusted withAdding tapping actions to the current operation Adjusting the back intensityTurning theHeatmassage head and Foot HeatOn and Off Select the body MassageFor a person with large body dimensions Press the buttonOperation of the Hand / ARM Ultra knead on palms massage AlternatesOperation of the Shoulder massage Operation of the Lower Back massageOperation of the HIP stretch Operation of the Neck stretchOperations of the LEG stretch When you want to adjust the reclining angle and/or leg rest Press to turn on the powerAfter completing the massage Disconnecting the powerReturning to normal chair position If you experience any problems Timer functionInterrupting the massage Areas covered with synthetic leather Cleaning and maintenancePlastic area Dry cleaning How to attachSeat fabric Sole covers can be removed and washedMoving the unit Moving by lifting it with 2 or more personsHow to remove the armrest Using the castors to move the unitIt is easier to move with the armrest removed About the automatic course/action/voice guidance function Overview of the automatic courseAdjusting the voice guidance volume Off Soft Medium LoudUsage situation Usage methodIs it possible to massage only the upper body or legs? Massaging only the upper bodyHow does body scanning work? Body scanningShoulder position is detected by the following mechanism There is a delay in movement when adjusting the position Upper body massageHand & arm massages Operating sounds during air MassageReclining Leg restController Controller holder is unsteadyNoise grows louder after using the chair for a long time Is there a timer function?Take the following precautions OtherTroubleshooting Problem Cause and RemedyProblem Troubleshooting（）Sounds and sensations of the unit Error display Error display ContentsPanasonic Corporation of North America