Display back light setting, Buzzer volume setting

< > accept <-cncl

3.3.6Display back light setting

Set the intensity of the back light to your convenience. The light switches on when you press any button and switches off after 30 seconds.

3.3.7Keyboard back light setting

Set the intensity of the back light to your convenience. The light switches on when you press any button and switches off after 30 seconds.

3.3.8Buzzer volume setting

Change the buzzer volume with [<], [>] and confirm it with [accept].

3.3.9Buzzer frequency setting

Change the buzzer frequency with [<], [>] and confirm it with [accept].

3.3.10 Buzzer on-time setting

Change the buzzer on-time with [<], [>] and confirm it with [accept].

3.3.11 Display software version

Displays the actual software version of the recorder.

3.4Status menu

Press RED button (4). The display mode will change between full menu information or only showing actual temperatures enlarged :

3.5Display back light setting

<> accept <-cncl

3.6Keyboard back light setting

<> accept <-cncl

3.7Buzzer volume setting

<> accept <-cncl

3.8Buzzer frequency setting

<> accept <-cncl

3.9Buzzer on-time setting

<> accept <-cncl

DATACOLD 500 1.00(8) © 11/12/2002 15:49

<-menu

T1	-18	T2	-21
T3	3	T4	4

If a communication with the micro of the refrigeration unit has been validated in Menu 11 (Communication setting), the status display lay-out is modified as follow :

-Compartment number.

-Set point of the compartment.

-“A” if there is an alarm situation on the refrigeration unit.

-Temperature selected for the compartment or “ Defrost on” if

the compartment is defrosting.

Comp.1 (SP –20.0) A

T1-18T2-4

Page 16

62-61138-20 (02/03)