Agilent Technologies 1680, 1690 manual To test the multiple-clock state acquisition

Contents

To test the threshold accuracy				28
Set up the equipment	28
Connect and configure the logic analyzer					29
Test the ECL Threshold		30
Test the 0 V User Threshold			31
Test the next pod 32
To set up the logic analyzer for the state mode tests						33
To test the single-clock,single-edge, state acquisition						37
Set up the equipment	37
Connect and configure the logic analyzer					37
Verify the test signal	40
Check the setup/hold combination				41
Test the next channels (1680/81A,AD and 1690/91A,AD)						47
To test the multiple-clock state acquisition 48
Set up the equipment	48
Connect and configure the logic analyzer					49
Verify the test signal	51
Check the setup/hold with single clock edges, multiple clocks							52
Test the next channels (1680/81A, AD and 1690/91A, AD)						56
To test the single-clock,multiple-edge, state acquisition							57
Set up the equipment	57
Connect and configure the logic analyzer					58
Verify the test signal	60
Check the setup/hold with single clock, multiple clock edges							61
Test the next channels (1680/81A,AD and 1690/91A,AD)						65
To test the time interval accuracy 66
Set up the equipment	66
Connect and configure the logic analyzer					67
Acquire and verify the test data 69
Performance Test Record			71
4 Calibrating and Adjusting
Logic analyzer calibration		76

6