OWNER'S RESPONSIBILmES
Follow the hourly or calendar intervals, whichever occurs first.
More frequent service is required when operating in adverse conditions noted below.
MABNTENANCE SCHEDULE
FILL tN DATES AS YOUSERVICE DATES
COMPLETE REGULAR SERVICE
SERVICE DATES
| Before | Every 25 | Every 50 Every 100 |
| |||
MAINTENANCE TASK | Hours or |
|
|
| Yearty | ||
Each Use | Hours or | Hours | or | ||||
|
| ||||||
|
|
| |||||
| Yearly |
|
|
|
| ||
|
| Yeady | Year | y |
| ||
|
|
|
| ||||
PRESSURE WASHER
Check/dean water inlet screen
Check high pressure hose
Check detergent hose
Check spray gun and assembly for leaks Purge pump of air and contaminants Change pump oil
Prepare pump for storage below 32°F
ENGINE
Check oil level
Clean debris
Change engine oit
Service air cleaner
E
Service spark plug
Service spark arrester
X _
x x x x
×
See Storage on pages 18-19.
x
x
X _
x
C_ean | cooling | system | x 2 |
Check | valve | clearance |
|
Prepare for | storage | If unit is to remain idle for longer than 30 days | |
1
2
Clean if clogged. Reptace if perforated or torn.
Change oil after the first (5) operating hours and every 50 hours or yearly thereafter. Change sooner when operating under dirty or dusty conditions.
RepIace more often under dirty or dusty conditions.
GENERAL RECOMMENDATIONS
Regular maintenance will improve the performance
and extend the life of the pressure washer. See any authorized Sears dealer for service.
The pressure washer warranty does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain pressure washer as instructed in this manual including proper storage as detailed in "Storage" on pages
Some adjustments will need to be made periodically to properly maintain your pressure washer.
All service and adjustments should be made at least
once each season. Follow the requirements in the "Maintenance Schedule" chart above.
NOTE: Once a year you should clean or replace the spark plug and replace the air filter. A new spark plug and clean air filter assure proper
if equipped with inflatable tires, keep the air pressure at the value marked on the tire or within 15 and 40 psi.
EMISSION CONTROL
Maintenance, replacement or repair of the emission control devices and systems may be performed by any
BEFORE EACH USE
1.Check engine oil level.
2.Clean debris.
3.Check water inlet screen for damage.
4.Check
5.Check high pressure hose for leaks.
6.Check chemical filters for damage.
7.Check gun and nozzle extension assembly for leaks.
8.Purge pump of air and contaminants.
13