Nilfisk-ALTO 5 SB FA operating instructions Options / model variants

4.4Manual mode

4.4.1Cold water operation / Hot water operation (up to 100°C)

4.4.2Steam operation (over 100°C (212°F))

Beware of hot water and steam discharge up to 150°C when operating in steam stage.

NEPTUNE 5 SB FA

1.Turn the main switch to posi-

tion (cold water).

Control electronics accomplishes a self check.

The Display shows for approx. 1 second „---“.

The motor starts. is ON.

2.Turn the main switch to posi-

tion (hot water).

3.Select temperature.

4.Unlock the spray gun and squeeze trigger.

5.The oil burner will light.

6.Release trigger and lock the spray gun when not in use.

NOTE!

The cleaner switches off auto- matically twenty seconds after the spray gun has been closed.To start the cleaner again, squeeze the trigger and the machine will start automatically.

1.Open cabinet (and service door if desired - see chapter 3.6, Step 1+2).

2.Turn the twist grip on the safety control block all the way to the left (counter-clockwise-direction).

3.Turn the main switch to position .

4.Select temperature (over 100°C

(212°F)).

For special applications: replace the standard nozzle with the steam spray nozzle (accessory).

1) Options / model variants 11