Nilfisk-ALTO 5 SB FA After using the cleaner, Lines, Storing the cleaner, Below 0C 32F

NEPTUNE 5 SB FA

6 After using the cleaner

6.1Switching off the cleaner

1.Turn the main switch to posi- tion „OFF“.

2.Turn off water supply at faucet.

3.Squeeze the spray gun trigger until the pressure has bled off.

4.Slide trigger lock to the locked position.

6.2Disconnecting supply 1. Turn the main switch to posi-

lines	tion „OFF“.
2.	Turn off water supply at
	faucet.
3.	Squeeze the spray gun trigger
	until the pressure has bled
	off.

4.Slide trigger lock to the locked position.

5.Remove the water supply hose from the cleaner.

6.Remove power cord plug from the electrical supply.

6.3Rolling up the electrical cord and storing accessories

Risk of tripping!

To prevent accidents, always carefully roll up the power cord.

Machines with hose and/or cord reel:

1.Wind up the power cord as il- lustrated with the plug located in the center of the cord reel.

2.Wind up the high pressure hose as illustrated.

3.Place the spray lance into the spray lance storage.

6.4	Storing the cleaner	Store the cleaner in a dry heated				squeeze and release the trig-
	(below 0°C (32°F))	location to protect against freez-				ger two or three times.
		ing or protect per below instruc-			7. The machine is protected
		tions:				against freezing when anti-
						freeze mixture emerges from
		1.	Remove the water supply			the spray gun.
			hose from the cleaner.		8.	Lock the safety catch on the
		2.	Remove the spray lance.			spray gun.
	A	3.	Switch on the cleaner with the		9.	Switch off the cleaner.
		4.	main switch in position	.	10.To avoid any possible dam-
			Squeeze trigger of the spray			age, store the cleaner tempo-
			gun.			rarily in a heated room before
		5.	Gradually pour antifreeze (ap-			using it again.
			prox. 5 litres) into the water		11.When the machine is put into
			tank (A).			service again, the antifreeze
		6.	While the pump is pulling the			solution can be collected and
			mixture from the water tank,			stored for future use.
16						1) Options / model variants