6.As the pool temperature rises to the desired tem- perature as controlled by the Pool aquastat, small adjustments to valves "A" and "B" will be required for optimum performance. Heater temperatures should be checked regularly to prevent heater condensation. The heater inlet temperature can be higher than 105°F without heater damage but operating at less than 105°F inlet can cause dam- age from condensation.
NOTE: Consult factory if target temperatures cannot be achieved.
Piping Configurations for Raytherm Commercial Pool Heaters
INTERNAL DIVERTING
BYPASS SYSTEM (UG)
Models 0926 thru 1223 with UG
15