Zenoah RMSZ2601-CA, RMNBZ2601 Manufacturer’s warranty coverage, Owner’s warranty responsibilities

Page 58

CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The California Air Resources Board and ZENOAH AMERICA, INC. are pleased to explain the emission control system warranty on your 2007 and later small off-road engine. In California, new small off-road engines must be designed, built and equipped to meet the state’s stringent anti-smog standards. ZENOAH AMERICA, INC. must warrant the emission control system on your small off-road engine for the periods of time listed below provided there has been no abuse, neglect or improper maintenance of your small off-road engine.

Your emission control system may include parts such as the carburetor, fuel tank and the ignition system.

Where a warrantable condition exists, ZENOAH AMERICA, INC. will repair your small off-road engine at no cost to you including diagnosis, parts and labor.

Manufacturer’s warranty coverage:

The 2007 and later small off-road engines are warranted for two years. If any emission- related part on your engine is defective, the part will be repaired or replaced by ZENOAH AMERICA, INC.

Owner’s warranty responsibilities:

–As the small off-road engine owner, you are responsible for the performance of the required maintenance listed in your owner’s manual. ZENOAH AMERICA, INC. recommends that you retain all receipts covering maintenance on your small off-road engine, but ZENOAH AMERICA, INC. can not deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance.

–As the small off-road engine owner, you should be aware, however, that ZENOAH AMERICA, INC. may deny you warranty coverage if your small off-road engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modification.

–You are responsible for presenting your small off-road engine to a ZENOAH AMERICA, INC. distribution center as soon as a problem exists. The warranty repairs should be completed in e reasonable amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should contact ZENOAH AMERICA, INC. at (770)-381-5147 or you can write to

ZENOAH AMERICA, INC.

1100 Laval Blvd. Suite 110

Lawrenceville, Georgia 30043

RMSZ2601-CA, RMNBZ2601-CA only

Page 57 Page 59
Image 58
Page 57 Page 59
Contents OWNER/OPERATOR Manual Mode D’EMPLOI Manual DE Instrucciones Contents Tables des matieres Contenido Differents Types D’AVERTISSEMENT DE CE Mode D’EMPLOIAdvertencias Contenidas EN EL Manual Parts location SpecificationsRMSZ2601 / RMNBZ2601 / RMSZ2601-CA / RMNBZ2601-CA Fiche technique Emplacement des pieces Situación de las piezasEspecificaciohes Wear head, eye and ear protection Symbols on the machineMachine PositionEmplacement PosiciónWorking Condition For safe operationWorking Circumstance Condiciones DE Trabajo Consignes de securite Instrucciones de seguridadConditions DE Travail PrecaucionesWorking Plan Before Starting the EngineDE LA Machine Plan DE TravailPlan DE Trabajo Avant DE Mettre LE Moteur EN MarcheStarting the Engine Using the ProductUse only for tasks explained in the manual Utilisation DE LA Machine Demarrage DU MoteurArranque DEL Motor USO DEL ProductoMaintenance If Someone ComesSI Alguien SE Aproxima SI QUELQU’UN S’APPROCHEEntretien MantenimientoRefill after cooling the engine Handling FuelTransportation Manipulación DEL Combustible Manipulation DU CarburantTransport TransporteSweeper Assembly SE2 Set upInstall the Handle Clevis Pin Hitch Pin Cotter Pin Drum Axle Drum AssemblyEnsemble DE Balayage SE2 Assemblage MontajeConjunto DE LA Barredora SE2 Nylon Brush Attachment Procedure SE3Assemblage Montaje Set up Procédure d’installation Procedimiento de instalación Fuel When using RedMax/ZENOAH genuine oilRecommended Mixing Ratio Gasoline 50OIL Lors de l’utilisation de la véritable huile RedMax/ZENOAH Rapport DE Melange Recommande Essence 50 HuileCarburant Combustible Proporción DE LA Mezcla Recomendada Gasolina 50 AceiteFueling the Unit HOW to MIX FuelFor Your Engine LIFE, Avoid Eviter Pour Prolonger LA Duree DE VIE DU Moteur Comment Obtenir UN BON Melange Como Mezclar EL CombustibleRemplissage DU Reservoir Abastecimiento DE LA UnidadFuel Combustible SIN Aceite Gasolina Cruda OP1 OP2 OP3 OP4 Starting Engine OperationSweeping head will start rotating upon the engine starts Fonctionnement Uso OP5 Adjusting Throttle CableAdjusting Idling Speed OP6 OP6 OP7 Stopping Engine OP3Reglage DU Ralenti OP6 Reglage Câble D’ACCÉLÉRATEURAjuste Cable DEL Acelerador Avant DE Commencer L’UTILISATIONOP8 OP9 Direction of rotationTécnicas DE Funcionamiento OP8 OP9 OP10 Sens de rotationDirección de giro Maintain a shallow angle to the work surface Operating and Safety Tips OP11OP10 OP11 YOU Must Always Guard Against Thrown DebrisConsejos DE Funcionamiento Y Seguridad OP11 Fonctionnement UsoConseils D’UTILISATION ET DE Securite OP11 Vous Devez Toujours Vous Proteger DES Debris ProjetesAvoid low rpm operation General Safety InstructionsNever make unauthorized attachment installations Stay Alert Work SafelyInstructions Generales DE Securite Instrucciones Generales DE SeguridadMaintenance Maintenance ChartTableau D’ENTRETIEN EntretienMantenimiento Tabla DE MantenimientoReplacing the Gearcase OIL MA1 MA1Gearcase Lubrication End cap Main gearEntretien Mantenimiento Remplacement DE L’HUILE DU Carter ’ENGRENAGE MA1Cambio DEL Aceite DE LA Caja DE Cambios MA1 Capot de carter Engrenage principalAIR Filter Replacement Plug is a NGK CMR7HMA2 MA3 MA4 Fuel FilterBougie D’ALLUMAGE Filtre a AIRFiltre a Carburant Filtro DE AireSpark Arrester Tightening TorqueMuffler MA5 MA6 Intake AIR Cooling VentSilencieux Silenciador Couple DE SerragePAR DE Torsión PARE-ETINCELLESDisposal Procedures to be Performed After Every 100 Hours of USEStorage MA7Mise au rebut Eliminación Procedure a Effectuer Toutes LES 100 Heures D’UTILISATIONRangement Almacenamiento Cilindro Toma de aire de refrigeración posterior12. Guía de localización y solución de problemas Troubleshooting guideGuide de localisation des pannes Barredora NotaRMSZ2601 / RMSZ2601-CA Pipe Comp RMNBZ2601 / RMNBZ2601-CA Nylon Brush Ass’y 99909-11004 Parts list Description Part Number Qty Manufacturer’s warranty coverage Owner’s warranty responsibilitiesCouverture de la garantie constructeur Obligations du propriétaire liées à la garantieCobertura de la garantía dada por el fabricante Responsabilidades del propietarioLimited Warranty Garantie limitée Garantía Limitada Control DE Emisiones Emission Control Mesures DE Lutte ContreLES Emissions RMSZ2601-CA/RMNBZ2601-CA RMSZ2601-CA/RMNBZ2601-CA

RMSZ2601-CA, RMNBZ2601-CA, RMNBZ2601, RMSZ2601 specifications

The Zenoah RMSZ2601, RMNBZ2601, RMNBZ2601-CA, and RMSZ2601-CA are advanced, high-performance engines designed for professional use in various applications, particularly in the realms of landscaping, agriculture, and industrial equipment. Known for their reliability and durability, these engines are engineered to meet the rigorous demands of both commercial and residential users.

One of the standout features of these models is their two-stroke engine design, which allows for a higher power-to-weight ratio compared to four-stroke engines. This lightweight construction makes the Zenoah engines easier to maneuver and operate in tight spaces without sacrificing power. The RMSZ2601, for instance, boasts a displacement of 26 cc, delivering impressive torque and efficiency, making it suitable for a range of tasks from trimming to industrial drives.

Another key characteristic of these engines is their advanced ignition system, which enhances starting ease and operational stability. The incorporation of Zenoah’s unique digital ignition technology ensures a quick start and consistent performance across varying conditions. Additionally, these engines are equipped with an anti-vibration system that minimizes operator fatigue, enabling extended use without discomfort.

The RMNBZ2601 and its variants are also designed with an emphasis on reduced emissions. The CA models incorporate catalytic converters to meet stringent environmental regulations, making them a responsible choice for users conscious of their ecological footprint. This not only helps comply with governmental standards but also contributes to a cleaner working environment.

Moreover, Zenoah emphasizes user-friendly features in their engine designs. Both the RMSZ2601 and RMNBZ2601 models feature easy-access fuel and oil tanks that simplify refueling and maintenance. The filters are conveniently positioned for straightforward cleaning and replacement, ensuring longer operational life and reliability.

Durability is a hallmark of the Zenoah brand. The engines are constructed with high-grade materials that withstand the rigors of heavy-duty use. This ensures that the RMSZ2601, RMNBZ2601, and their variants maintain peak performance over time, even under challenging operating conditions.

In summary, the Zenoah RMSZ2601, RMNBZ2601, RMNBZ2601-CA, and RMSZ2601-CA represent cutting-edge technology in the small engine market, delivering robust performance, low emissions, and reliability. These features make them ideal choices for professionals in landscaping, agriculture, and other demanding sectors.
Top Page Image Contents