Zenoah RMNBZ2601-CA, RMSZ2601 manual OP5, OP6 OP7 Stopping Engine OP3, Adjusting Throttle Cable

Page 32

English

8. Operation

OP5

.04 in

(1~2mm) (1)

OP6

(1)

OP7

■STOPPING ENGINE (OP3)

1.Release the throttle lever and run the engine for a half minute.

2.Shift the ignition switch to the STOP position.

IMPORTANT

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

■ADJUSTING THROTTLE CABLE

•The normal play is 1 or 2mm when measured at the carburetor side end. Readjust with the cable adjuster as required. (OP5)

(1) cable adjuster

■ADJUSTING IDLING SPEED (OP6)

1.When the engine tends stop frequently at idling mode, turn the adjusting screw clockwise.

2.When the sweeping head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.

(1) idle adjusting screw

NOTE

•Warm up the engine before adjusting the idling speed.

■BREAK-IN OPERATION

The Properly Dressed Operator (OP7)

(1)ALWAYS wear hearing protective devices.

(2)ALWAYS wear eye protection such as goggles or safety glasses.

(3)ALWAYS wear a mask to protect against dust or other airborne particles.

(4)ALWAYS wear close fitting clothes. Gloves offer added protection and are strongly recommended. Do not wear clothing or jewelry that could get caught in machinery.

(5)ALWAYS wear leather or heavy-rubber shoes. NEVER work barefooted!

(6)BEWARE of thrown debris!

(7)DIRECTION OF ROTATION

•The RedMax Sweeper works best when its rubber fins can quickly slide or "skim" over the surface being swept.

•New or replacement sweeper belts tend to grip or

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents OWNER/OPERATOR Manual Mode D’EMPLOI Manual DE Instrucciones Contents Advertencias Contenidas EN EL Manual Differents Types D’AVERTISSEMENT DE CE Mode D’EMPLOITables des matieres Contenido RMSZ2601 / RMNBZ2601 / RMSZ2601-CA / RMNBZ2601-CA SpecificationsParts location Especificaciohes Emplacement des pieces Situación de las piezasFiche technique Symbols on the machine MachineWear head, eye and ear protection PositionEmplacement PosiciónWorking Circumstance For safe operationWorking Condition Consignes de securite Instrucciones de seguridad Conditions DE TravailCondiciones DE Trabajo PrecaucionesWorking Plan Before Starting the EnginePlan DE Travail Plan DE TrabajoDE LA Machine Avant DE Mettre LE Moteur EN MarcheUse only for tasks explained in the manual Using the ProductStarting the Engine Demarrage DU Moteur Arranque DEL MotorUtilisation DE LA Machine USO DEL ProductoMaintenance If Someone ComesSI QUELQU’UN S’APPROCHE EntretienSI Alguien SE Aproxima MantenimientoTransportation Handling FuelRefill after cooling the engine Manipulation DU Carburant TransportManipulación DEL Combustible TransporteSet up Install the HandleSweeper Assembly SE2 Clevis Pin Hitch Pin Cotter Pin Drum Axle Drum AssemblyConjunto DE LA Barredora SE2 Assemblage MontajeEnsemble DE Balayage SE2 Nylon Brush Attachment Procedure SE3Assemblage Montaje Set up Procédure d’installation Procedimiento de instalación Recommended Mixing Ratio Gasoline 50OIL When using RedMax/ZENOAH genuine oilFuel Rapport DE Melange Recommande Essence 50 Huile Carburant CombustibleLors de l’utilisation de la véritable huile RedMax/ZENOAH Proporción DE LA Mezcla Recomendada Gasolina 50 AceiteFor Your Engine LIFE, Avoid HOW to MIX FuelFueling the Unit Comment Obtenir UN BON Melange Como Mezclar EL Combustible Remplissage DU ReservoirEviter Pour Prolonger LA Duree DE VIE DU Moteur Abastecimiento DE LA UnidadFuel Combustible SIN Aceite Gasolina Cruda Sweeping head will start rotating upon the engine starts OperationOP1 OP2 OP3 OP4 Starting Engine Fonctionnement Uso Adjusting Throttle Cable Adjusting Idling Speed OP6OP5 OP6 OP7 Stopping Engine OP3Reglage Câble D’ACCÉLÉRATEUR Ajuste Cable DEL AceleradorReglage DU Ralenti OP6 Avant DE Commencer L’UTILISATIONOP8 OP9 Direction of rotationDirección de giro Sens de rotationTécnicas DE Funcionamiento OP8 OP9 OP10 Operating and Safety Tips OP11 OP10 OP11Maintain a shallow angle to the work surface YOU Must Always Guard Against Thrown DebrisFonctionnement Uso Conseils D’UTILISATION ET DE Securite OP11Consejos DE Funcionamiento Y Seguridad OP11 Vous Devez Toujours Vous Proteger DES Debris ProjetesGeneral Safety Instructions Never make unauthorized attachment installations Stay AlertAvoid low rpm operation Work SafelyInstructions Generales DE Securite Instrucciones Generales DE SeguridadMaintenance Maintenance ChartEntretien MantenimientoTableau D’ENTRETIEN Tabla DE MantenimientoMA1 Gearcase LubricationReplacing the Gearcase OIL MA1 End cap Main gearRemplacement DE L’HUILE DU Carter ’ENGRENAGE MA1 Cambio DEL Aceite DE LA Caja DE Cambios MA1Entretien Mantenimiento Capot de carter Engrenage principalReplacement Plug is a NGK CMR7H MA2 MA3 MA4AIR Filter Fuel FilterFiltre a AIR Filtre a CarburantBougie D’ALLUMAGE Filtro DE AireTightening Torque Muffler MA5 MA6Spark Arrester Intake AIR Cooling VentCouple DE Serrage PAR DE TorsiónSilencieux Silenciador PARE-ETINCELLESProcedures to be Performed After Every 100 Hours of USE StorageDisposal MA7Procedure a Effectuer Toutes LES 100 Heures D’UTILISATION Rangement AlmacenamientoMise au rebut Eliminación Cilindro Toma de aire de refrigeración posteriorGuide de localisation des pannes Troubleshooting guide12. Guía de localización y solución de problemas Barredora NotaRMSZ2601 / RMSZ2601-CA Pipe Comp RMNBZ2601 / RMNBZ2601-CA Nylon Brush Ass’y 99909-11004 Parts list Description Part Number Qty Manufacturer’s warranty coverage Owner’s warranty responsibilitiesCouverture de la garantie constructeur Obligations du propriétaire liées à la garantieCobertura de la garantía dada por el fabricante Responsabilidades del propietarioLimited Warranty Garantie limitée Garantía Limitada Emission Control Mesures DE Lutte Contre LES EmissionsControl DE Emisiones RMSZ2601-CA/RMNBZ2601-CA RMSZ2601-CA/RMNBZ2601-CA

RMSZ2601-CA, RMNBZ2601-CA, RMNBZ2601, RMSZ2601 specifications

The Zenoah RMSZ2601, RMNBZ2601, RMNBZ2601-CA, and RMSZ2601-CA are advanced, high-performance engines designed for professional use in various applications, particularly in the realms of landscaping, agriculture, and industrial equipment. Known for their reliability and durability, these engines are engineered to meet the rigorous demands of both commercial and residential users.

One of the standout features of these models is their two-stroke engine design, which allows for a higher power-to-weight ratio compared to four-stroke engines. This lightweight construction makes the Zenoah engines easier to maneuver and operate in tight spaces without sacrificing power. The RMSZ2601, for instance, boasts a displacement of 26 cc, delivering impressive torque and efficiency, making it suitable for a range of tasks from trimming to industrial drives.

Another key characteristic of these engines is their advanced ignition system, which enhances starting ease and operational stability. The incorporation of Zenoah’s unique digital ignition technology ensures a quick start and consistent performance across varying conditions. Additionally, these engines are equipped with an anti-vibration system that minimizes operator fatigue, enabling extended use without discomfort.

The RMNBZ2601 and its variants are also designed with an emphasis on reduced emissions. The CA models incorporate catalytic converters to meet stringent environmental regulations, making them a responsible choice for users conscious of their ecological footprint. This not only helps comply with governmental standards but also contributes to a cleaner working environment.

Moreover, Zenoah emphasizes user-friendly features in their engine designs. Both the RMSZ2601 and RMNBZ2601 models feature easy-access fuel and oil tanks that simplify refueling and maintenance. The filters are conveniently positioned for straightforward cleaning and replacement, ensuring longer operational life and reliability.

Durability is a hallmark of the Zenoah brand. The engines are constructed with high-grade materials that withstand the rigors of heavy-duty use. This ensures that the RMSZ2601, RMNBZ2601, and their variants maintain peak performance over time, even under challenging operating conditions.

In summary, the Zenoah RMSZ2601, RMNBZ2601, RMNBZ2601-CA, and RMSZ2601-CA represent cutting-edge technology in the small engine market, delivering robust performance, low emissions, and reliability. These features make them ideal choices for professionals in landscaping, agriculture, and other demanding sectors.
Top Page Image Contents