Using the Product, If Someone Comes, Maintenance

	English		Français
	5. For safe operation		5. Consignes de securite

off the engine and take the unit to your authorized Komatsu Zenoah servicing dealer for repair.

■USING THE PRODUCT

IMPORTANT

Cut only materials recommended by the manufacturer. And use only for tasks explained in the manual.

1.Grip the handles firmly with both hands using your whole hand. Place your feet slightly apart (slightly further apart than the width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady, even posture while working.

2.Keep cutting attachment below waist level.

3.Maintain the speed of the engine at the level required to perform cutting work, and never raise the speed of the engine above the level necessary.

4.If the unit start to shake or vibrate, turn off the engine and check the whole unit. Do not use it until the trouble has been properly corrected.

5.Keep all parts of your body away from rotating cutting attachment and hot surfaces.

6.Never touch the muffler, spark plug, or other metallic parts of the engine while the engine is in operation or immediately after shutting down the engine. Doing so could result in serious burns or electrical shock.

• IF SOMEONE COMES

1.Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Be careful if you are approached. Injury may result from flying debris.

2.If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around.

machine chez le revendeur agréé pour la faire réparer.

■UTILISATION DE LA MACHINE

IMPORTANT

Ne couper avec la machine que les matériaux recommandés par le fabricant.

1.Tenir les poignées de la machine fermement des deux mains. Ecarter légèrement les jambes (pour que les pieds reposent sur une largeur un peu plus importante que celle des épaules) et avoir une posture de travail stable et répartir le poids du corps également sur chaque jambe.

2.Maintenir l’outil de coupe toujours plus bas que le niveau de la taille.

3.Faire tourner le moteur à la vitesse appropriée à la coupe sans jamais accélérer inutilement au dessus du niveau nécessaire.

4.Si la machine se met à vibrer ou à créer des secousses, arrêter le moteur et procéder à une vérification totale de la machine.

5.Se tenir à distance de l’outil de coupe ou des parties chaudes de la machine.

6.Ne jamais toucher le silencieux, la bougie ou toute autre partie métallique du moteur pendant le fonctionnement ou aussitôt après son arrêt. Dans ces circonstances, les risques de brûlures ou d’électrocution sont importants.

• SI QUELQU’UN S’APPROCHE

1.Il faut se préserver des situations dangereuses à tout moment. Avertir les adultes de maintenir les enfants et les animaux à distances car le risque de recevoir des projections d’objet est important.

2.Si quelqu’un appelle ou interrompt le travail d’une manière ou d’une autre, arrêter le moteur avant de se tourner vers la personne.

■MAINTENANCE

1.In order to maintain your product in proper working order, perform the

■ENTRETIEN

1.De manière à conserver la machine en parfait état de marche, effectuer à

BC2001, TR2000 specifications

The Zenoah TR2000 and BC2001 are two prominent models in the realm of outdoor power equipment, renowned for their advanced technologies and efficient performance. These products are engineered for both professional landscapers and passionate gardeners, offering a balanced blend of power, durability, and ease of use.

The TR2000 is recognized for its robust engine design, incorporating a powerful two-stroke engine that delivers exceptional torque and performance. This model features an innovative air filtration system that minimizes the amount of dust and debris that enter the engine, promoting longevity and reliability. The lightweight frame enhances maneuverability, making it ideal for various applications, from trimming hedges to shaping larger topiaries.

On the other hand, the BC2001 showcases a versatile design, suitable for both grass cutting and brush clearing tasks. It is equipped with a high-efficiency cutting system that enables users to tackle dense vegetation effortlessly. The BC2001’s ergonomic handle design reduces operator fatigue, allowing prolonged usage without discomfort. Its adjustable harness ensures proper weight distribution, enhancing control and stability during operation.

Both models employ Zenoah’s signature G-Force Engine Technology, which optimizes fuel efficiency while reducing harmful emissions. This technology not only meets strict environmental regulations but also provides a cost-effective solution for users, as it minimizes fuel consumption over time.

Moreover, the TR2000 and BC2001 feature an easy-start mechanism that reduces the effort needed for ignition, making them accessible for users of all skill levels. Maintenance is simplified through user-friendly designs that allow for easy access to key components, ensuring that these machines stay in prime working condition with minimal downtime.

The build quality of the Zenoah models reflects a commitment to durability, utilizing high-grade materials that endure the rigors of outdoor use. Both the TR2000 and BC2001 are backed by a solid warranty, further emphasizing Zenoah's confidence in their products.

In conclusion, the Zenoah TR2000 and BC2001 stand out in the competitive landscape of outdoor power tools. With their combination of advanced technology, ergonomic design, and robust performance, these models cater to a wide array of users seeking reliability and efficiency in their gardening and landscaping tasks. Whether tackling simple yard maintenance or complex landscaping projects, these machines are engineered to meet the demands of every user.

5. For safe operation