Genie GS-3268, GS-2668 DC manual Function Tests, Do Not Operate Unless

Page 17

Third Edition • Third Printing

Operator's Manual

 

 

 

 

 

 

Do Not Operate Unless:

You learn and practice the principles of safe machine operation contained in this operator's manual.

1Avoid hazardous situations.

2Always perform a pre-operation inspection.

3Always perform function tests prior to use.

Know and understand the function tests before going on to the next section.

4Inspect the workplace.

5Only use the machine as it was intended.

Function Tests

Fundamentals

The function tests are designed to discover any malfunctions before the machine is put into service. The operator must follow the step-by-step instructions to test all machine functions.

A malfunctioning machine must never be used. If malfunctions are discovered, the machine must be tagged and removed from service. Repairs to the machine may only be made by a qualified service technician, according to the manufacturer's specifications.

After repairs are completed, the operator must perform a pre-operation inspection and function tests again before putting the machine into service.

Part No. 82750

Genie GS-2668 DC and Genie GS-3268 DC

15

Image 17
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesTip-over Hazards Electrocution HazardsGS-2668 DC Fall Hazards Component Damage Hazards Collision HazardsBodily Injury Hazard Damaged Machine Hazards Explosion and Fire HazardsCrushing Hazards Decal LegendExplosion Hazards Battery Safety Burn HazardsComponent Damage Hazard Tip-over HazardPage Platform Controls ControlsGround Control Panel StopFundamentals Pre-operation InspectionPre-operation Inspection Maintenance Symbols Legend MaintenanceObserve and Obey Check the Hydraulic Oil LevelCheck the Batteries Scheduled MaintenanceFunction Tests Test the Emergency Stop At the Ground ControlsTest the Up/Down Functions Test the Auxiliary LoweringAt the Platform Controls Test the Function Enable SwitchTest Emergency Stop Test the HornTest Drive and Braking Test the SteeringTest the Tilt Sensor Operation Test Limited Drive SpeedWorkplace Inspection Workplace InspectionOnly use the machine as it was intended Operating InstructionsEmergency Stop Operation From Platform Auxiliary LoweringOperation From Ground Error Indicator Light On Drive Select SwitchOperation From Ground with Controller Fall ProtectionDry Battery Filling Charging Instructions Battery and Charger Instructions Observe and ObeyTo Charge Battery Brake Release Operation Transport and Lifting InstructionsAxis Lifting InstructionsSecuring to Truck or Trailer for Transit Inspection for Decals with Words DecalsDecals Ground Controls Side Battery SideInspection for Decals with Symbols Battery Side Ground Controls D e l GS-2668 DC SpecificationsSpecifications Distributed By