Genie GS-3268, GS-2668 DC manual Safety Rules, Do Not Operate Unless

Page 3

Third Edition • Third Printing

Operator's Manual

 

 

 

 

 

 

Safety Rules

Danger

Failure to obey the instructions and safety rules in this manual will result in death or serious injury.

Do Not Operate Unless:

You learn and practice the principles of safe machine operation contained in this operator's manual.

1 Avoid hazardous situations.

Know and understand the safety rules before going on to the next section.

2 Always perform a pre-operation inspection.

3 Always perform function tests prior to use.

4 Inspect the workplace.

5 Only use the machine as it was intended.

You read, understand and obey the manufacturer's instructions and safety rules— safety and operator's manuals and machine decals.

You read, understand and obey employer's safety rules and worksite regulations.

You read, understand and obey all applicable governmental regulations.

You are properly trained to safely operate the machine.

Part No. 82750

Genie GS-2668 DC and Genie GS-3268 DC

1

Image 3
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesTip-over Hazards Electrocution HazardsGS-2668 DC Fall Hazards Collision Hazards Bodily Injury HazardComponent Damage Hazards Decal Legend Explosion and Fire HazardsDamaged Machine Hazards Crushing HazardsTip-over Hazard Battery Safety Burn HazardsExplosion Hazards Component Damage HazardPage Platform Controls ControlsGround Control Panel StopFundamentals Pre-operation InspectionPre-operation Inspection Check the Hydraulic Oil Level MaintenanceMaintenance Symbols Legend Observe and ObeyCheck the Batteries Scheduled MaintenanceFunction Tests Test the Auxiliary Lowering At the Ground ControlsTest the Emergency Stop Test the Up/Down FunctionsTest the Horn Test the Function Enable SwitchAt the Platform Controls Test Emergency StopTest Drive and Braking Test the SteeringTest the Tilt Sensor Operation Test Limited Drive SpeedWorkplace Inspection Workplace InspectionOperating Instructions Emergency StopOnly use the machine as it was intended Auxiliary Lowering Operation From GroundOperation From Platform Fall Protection Drive Select SwitchError Indicator Light On Operation From Ground with ControllerBattery and Charger Instructions Observe and Obey To Charge BatteryDry Battery Filling Charging Instructions Brake Release Operation Transport and Lifting InstructionsAxis Lifting InstructionsSecuring to Truck or Trailer for Transit Inspection for Decals with Words DecalsDecals Ground Controls Side Battery SideInspection for Decals with Symbols Battery Side Ground Controls D e l GS-2668 DC SpecificationsSpecifications Distributed By