Third Edition • Third Printing | Operator's Manual | |
|
|
|
|
|
|
At the Platform Controls
Test Emergency Stop
17Push in the platform red Emergency Stop button to the off position.
Result: No functions should operate.
18 Pull the red Emergency Stop button out to the on position.
Result: The green power light should come on.
Test the Horn
19 Push the horn button.
Result: The horn should sound.
Test the Function Enable Switch
20Do not hold the function enable switch on the control handle.
21Slowly move the control handle in the direction indicated by the blue arrow, then in the direction indicated by the yellow arrow.
Result: No functions should operate.
FUNCTION TESTS
Test the Up/Down Functions
22 Press the lift function select button.
23Press and hold the function enable switch on the control handle.
24Slowly move the control handle in the direction indicated by the blue arrow.
Result: The platform should raise.
25 Release the control handle.
Result: The platform should stop raising.
26Press and hold the function enable switch. Slowly move the control handle in the direction indicated by the yellow arrow.
Result: The platform should lower. The descent alarm should sound while the platform is lowering.
Part No. 82750 | Genie | 17 |