Genie GS-3268 Operating Instructions, Emergency Stop, Only use the machine as it was intended

Page 23

Third Edition • Third Printing

Operator's Manual

 

 

 

 

 

 

Operating Instructions

Fundamentals

The Operating Instructions section provides instructions for each aspect of machine operation. It is the operator's responsibility to follow all the safety rules and instructions in the operator's, safety and responsibilities manuals.

Do Not Operate Unless:

You learn and practice the principles of safe machine operation contained in this operator's manual.

1Avoid hazardous situations.

2Always perform a pre-operation inspection.

3Always perform function tests prior to use.

4Inspect the workplace.

5Only use the machine as it was intended.

Using the machine for anything other than lifting personnel, along with their tools and materials, to an aerial work site is unsafe and dangerous.

Only trained and authorized personnel should be permitted to operate a machine. If more than one operator is expected to use a machine at different times in the same work shift, they must all be qualified operators and are all expected to follow all safety rules and instructions in the operator's, safety and responsibilities manuals. That means every new operator should perform a pre-operation inspection, function tests, and a workplace inspection before using the machine.

Emergency Stop

Push in the red Emergency Stop button to the off position at the ground controls or the platform controls to stop all functions.

Repair any function that operates when either red Emergency Stop button is pushed in.

Part No. 82750

Genie GS-2668 DC and Genie GS-3268 DC

21

Image 23
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesTip-over Hazards Electrocution HazardsGS-2668 DC Fall Hazards Component Damage Hazards Collision HazardsBodily Injury Hazard Decal Legend Explosion and Fire HazardsDamaged Machine Hazards Crushing HazardsTip-over Hazard Battery Safety Burn HazardsExplosion Hazards Component Damage HazardPage Platform Controls ControlsGround Control Panel StopFundamentals Pre-operation InspectionPre-operation Inspection Check the Hydraulic Oil Level MaintenanceMaintenance Symbols Legend Observe and ObeyCheck the Batteries Scheduled MaintenanceFunction Tests Test the Auxiliary Lowering At the Ground ControlsTest the Emergency Stop Test the Up/Down FunctionsTest the Horn Test the Function Enable SwitchAt the Platform Controls Test Emergency StopTest Drive and Braking Test the SteeringTest the Tilt Sensor Operation Test Limited Drive SpeedWorkplace Inspection Workplace InspectionOnly use the machine as it was intended Operating InstructionsEmergency Stop Operation From Platform Auxiliary LoweringOperation From Ground Fall Protection Drive Select SwitchError Indicator Light On Operation From Ground with ControllerDry Battery Filling Charging Instructions Battery and Charger Instructions Observe and ObeyTo Charge Battery Brake Release Operation Transport and Lifting InstructionsAxis Lifting InstructionsSecuring to Truck or Trailer for Transit Inspection for Decals with Words DecalsDecals Ground Controls Side Battery SideInspection for Decals with Symbols Battery Side Ground Controls D e l GS-2668 DC SpecificationsSpecifications Distributed By