Genie GS-2668 DC, GS-3268 manual Contents, Contact us

Page 2

Operator's Manual

Third Edition • Third Printing

 

 

 

 

 

 

Important

Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, please call Genie Industries.

Contents

 

 

Page

Safety

1

Legend

8

Controls

9

Pre-operation Inspection

11

Maintenance

13

Function Tests

15

Workplace Inspection

20

Operating Instructions

21

Transport and Lifting Instructions

25

Decals

28

Specifications

32

Contact us:

Internet: http://www.genielift.com

e-mail: techpub@genieind.com

Copyright © 1999 by Genie Industries

First Edition: Sixth Printing, January 2002

Second Edition: Second Printing, March 2002

Third Edition: Third Printing, October 2004

"Genie" is a registered trademark of

Genie Industries in the U.S.A. and many other countries. "GS" is a trademark of Genie Industries.

These machines comply with

ANSI/SIA 92.6-1999.

Printed on recycled paper

Printed in U.S.A.

Genie GS-2668 DC and Genie GS-3268 DC

Part No. 82750

Image 2
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Tip-over HazardsGS-2668 DC Fall Hazards Component Damage Hazards Collision HazardsBodily Injury Hazard Crushing Hazards Explosion and Fire HazardsDamaged Machine Hazards Decal LegendComponent Damage Hazard Battery Safety Burn HazardsExplosion Hazards Tip-over HazardPage Controls Platform ControlsStop Ground Control PanelPre-operation Inspection FundamentalsPre-operation Inspection Observe and Obey MaintenanceMaintenance Symbols Legend Check the Hydraulic Oil LevelScheduled Maintenance Check the BatteriesFunction Tests Test the Up/Down Functions At the Ground ControlsTest the Emergency Stop Test the Auxiliary LoweringTest Emergency Stop Test the Function Enable SwitchAt the Platform Controls Test the HornTest the Steering Test Drive and BrakingTest Limited Drive Speed Test the Tilt Sensor OperationWorkplace Inspection Workplace InspectionOnly use the machine as it was intended Operating InstructionsEmergency Stop Operation From Platform Auxiliary LoweringOperation From Ground Operation From Ground with Controller Drive Select SwitchError Indicator Light On Fall ProtectionDry Battery Filling Charging Instructions Battery and Charger Instructions Observe and ObeyTo Charge Battery Transport and Lifting Instructions Brake Release OperationLifting Instructions AxisSecuring to Truck or Trailer for Transit Decals Inspection for Decals with WordsGround Controls Side Battery Side DecalsInspection for Decals with Symbols Battery Side Ground Controls Specifications D e l GS-2668 DCSpecifications Distributed By