Genie GS-2668 DC, GS-3268 manual Auxiliary Lowering, Operation From Ground, Operation From Platform

Page 24

Operator's Manual

Third Edition • Third Printing

 

 

 

 

 

 

OPERATING INSTRUCTIONS

Auxiliary Lowering

Machines equipped with a separate auxiliary lowering button next to the ground control panel:

1 Turn the key switch to ground control.

2Pull out the ground red Emergency Stop button to the on position.

3Push and hold the auxiliary lowering button.

Machines not equipped with a separate auxiliary lowering button:

1Turn the key switch to ground control.

2Pull out the ground red Emergency Stop button to the on position.

3Push and hold the function enable button.

4Activate the platform down function.

Operation From Ground

1Turn the key switch to ground control.

2Pull out both ground and platform red Emergency Stop buttons to the on position.

3Be sure the battery pack is connected before operating the machine.

To Position Platform

1Push and hold the function enable button.

2Activate the platform up or the platform down function.

Drive and steer functions are not available from the ground controls.

Operation From Platform

1Turn the key switch to platform control.

2Pull out the ground and platform red Emergency Stop buttons to the on position.

3Be sure the battery pack is connected before operating the machine.

To Position Platform

1Press the lift function select button.

2Press and hold the function enable switch on the control handle.

3Move the control handle according to the markings on the control panel.

To Steer

1Press and hold the function enable switch on the control handle.

2Turn the steer wheels with the thumb rocker switch located on the top of the control handle.

To Drive

1Press and hold the function enable switch.

2Increase speed: Slowly move the control handle off center.

Decrease speed: Slowly move the control handle toward center.

Stop: Return the control handle to center or release the function enable switch.

Use the color-coded direction arrows on the platform controls and on the platform to identify the direction the machine will travel.

Machine travel speed is restricted when the platform is raised.

Battery condition will affect machine performance. When the battery charge indicator light flashes, the machine drive speed is limited and the lift function is disabled.

22

Genie GS-2668 DC and Genie GS-3268 DC

Part No. 82750

Image 24
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Tip-over HazardsGS-2668 DC Fall Hazards Collision Hazards Bodily Injury HazardComponent Damage Hazards Explosion and Fire Hazards Damaged Machine HazardsCrushing Hazards Decal LegendBattery Safety Burn Hazards Explosion HazardsComponent Damage Hazard Tip-over HazardPage Controls Platform ControlsStop Ground Control PanelPre-operation Inspection FundamentalsPre-operation Inspection Maintenance Maintenance Symbols LegendObserve and Obey Check the Hydraulic Oil LevelScheduled Maintenance Check the BatteriesFunction Tests At the Ground Controls Test the Emergency StopTest the Up/Down Functions Test the Auxiliary LoweringTest the Function Enable Switch At the Platform ControlsTest Emergency Stop Test the HornTest the Steering Test Drive and BrakingTest Limited Drive Speed Test the Tilt Sensor OperationWorkplace Inspection Workplace InspectionOperating Instructions Emergency StopOnly use the machine as it was intended Auxiliary Lowering Operation From GroundOperation From Platform Drive Select Switch Error Indicator Light OnOperation From Ground with Controller Fall ProtectionBattery and Charger Instructions Observe and Obey To Charge BatteryDry Battery Filling Charging Instructions Transport and Lifting Instructions Brake Release OperationLifting Instructions AxisSecuring to Truck or Trailer for Transit Decals Inspection for Decals with WordsGround Controls Side Battery Side DecalsInspection for Decals with Symbols Battery Side Ground Controls Specifications D e l GS-2668 DCSpecifications Distributed By