FEATURES AND CONTROLS
KNOW YOUR GENERATOR
Read this Operator’s Manual and safety rules before operating your generator.
Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
Recoil Starter | Rocker Switch |
Fuel Tank |
|
Choke Lever
Air Cleaner
120 Volt AC, 30 Amp
Locking Receptacle
Data Tag
120 Volt AC, 20 Amp |
|
|
Duplex Receptacle | Circuit Breakers (AC) | Grounding Fastener |
120 Volt AC, 20 Amp Duplex Receptacle — May be used to supply electrical power for the operation of 120 Volt AC, 20 Amp, single phase, 60 Hz electrical lighting, appliance, tool and motor loads.
120 Volt AC, 30 Amp Locking Receptacle — May be used to supply electrical power for the operation of 120 Volt AC, 30 Amp, single phase, 60 Hz electrical lighting, appliance, tool and motor loads.
Air Cleaner — Protects engine by filtering dust and debris out of intake air.
Choke Lever — Used when starting a cold engine.
Circuit Breakers (AC) — Each receptacle is provided with a
Data Tag – Provides model, revision and serial number of generator. Please have these readily available if calling for assistance.
Fuel Tank — Capacity of one U.S. gallon.
Grounding Fastener — Consult your local agency having jurisdiction for grounding requirements in your area.
Recoil Starter — Used to start the engine.
Rocker Switch — Set this switch to "On" before using recoil starter. Set switch to "Off" to switch OFF engine.
5