Baldor ISO9001 manual

Page 4

ƇNever permit anyone to operate the generator set without proper instructions.

ƇNever allow children to operate the generator set.

ƇChildren and pets must be kept away from the area of operation due to the possibility of burns from hot engine components or injury from any equipment the generator set is powering.

ƇAlways wear eye protection and Hearing protection when working near the generator set.

ƇOperate the generator set only with the guards, shields and other safety items in place and working properly.

ƇDo not put hands, feet, tools or other objects near rotating parts.

ƇUse reasonable care when moving or lifting the unit. The generator set may move around inside the wrap frame creating "Pinch Points".

ƇDo not run the generator set while it is being moved.

ƇDo not support the generator set from the top of the wrap frame.

ƇDo not operate the generator set while under the influence of alcohol, drugs or medication.

ƇWhen transporting or using a generator set with the wheel option, secure the unit to prevent it from moving around.

ƇDo not tamper with or change the engine speed as it has been preset at the factory for proper operation.

ƇKeep hands and face away from the carburetor when the air cleaner is being moved. A sudden backfire can cause serious burns.

ƇBe careful of hot parts. The muffler and other generator parts become very hot while the engine is running.

ƇDo not "jump start" the generator set.

ƇSulfuric acid can cause severe injury and can give off gases, which are corrosive and potentially explosive. Avoid contact with skin, eyes, and clothing. In case of contact, flush area immediately with water.

ƇWhen transporting a generator set, secure it to prevent it from moving or shifting.

ƇKnow how to stop the engine quickly and understand the operation of all controls.

ƇDo not operate electrical equipment while standing in water, on wet ground or with wet hands or shoes.

ƇUse extreme caution when working on electrical components. Potentially dangerous voltage is present when the engine is running.

-iii -

Image 4
Contents Standby Permanent Mount Series Generator Forward Page Page Ż ż for Gasoline or Diesel Powered Generator Sets ż ż ż ż Ż ż for Gasoline or Diesel Powered Generator Sets ż ż ż ż Standby PERMANENT- Mount Series Generator Baldor Generator Features Options BaldorFarm Duty 1-Phase Model DLC25 Engine SpecificationsModel D50 Farm Duty 1-Phase Model DLC50 PowerPACModel D60 Farm Duty 1-Phase Model DLC60 Engine SpecificationsModel D75 Farm Duty 1-Phase Model DLC75 Engine DataModel D100 Farm Duty 1-Phase Model DLC100Model D130 Farm Duty 1-Phase Model DLC130 Hard Wire Load Terminal Block Electrical Connection InformationConnection Information Engine Cooling Requirements Generator Mounting RequirementsStandby Permanent Mount Series Generator Engine Cooling AIR HOT Exhaust Gases Backpressure must not exceed 20 of water columnPage Building Ventilation Generator END Cooling AIRBuilding Ventilation Exhaust Requirements Exhaust PipingExhaust Piping Thru Walls and Roofs Exhaust Thimble Minimum O.DDouble Thimble Roof Outlet Details Control Panel Operation Function Page Page Operation Starting Operation Cranking Control No Voltage LOW VoltageHigh Voltage Fluctuating VoltageOverheating Generator Frame Produces Shock When Touched Mechanical NoiseTroubleshooting Engine Limited Warranty Warranty Period Limitations Distributor Information END User / Owner Information RPMKVA CurrentPre Start-Up Check List Start-Up Procedure Oregon Street Oshkosh WI Phone 920-239-4200 Fax California Proposition 65 Warning Oregon Street Oshkosh WI Phone 920 236-4200 Fax 920