Craftsman 536.88123 operating instructions Howto Useyour Snow Thrower, To Control Snow Discharge

Page 10

Auger Drive Lever - Starts and stops the auger and impeller (snow gathering and throwing).

Traction Drive Lever - Propels the snow thrower forward and in reverse.

Speed Select Lever - Selects the speed of snow thrower (6 speeds forward and 2 speeds reverse).

Crank Assembly - Changes the direction of snow throwing through the discharge chute.

Chute Deflector- Changes the distance the snow is thrown.

Discharge Chute - Changes the direction the snow is thrown.

HOWTO USEYOUR SNOW

THROWER

TO STOPYOUR SNOWTHROWER

•To stop throwing snow, release the auger drive lever (see figure below),

•To stop the wheels, release the traction drive lever,

•To stop the engine, push the throttle con- trol lever to off and pull out (DO NOT

TURN) the ignition key, see figure on page 9,

Electric Starter Button

Primer button

Choke Control - Used to start a cold en-

gine.

Height Adjust Skids - Adjusts the ground clearance of the auger housing.

Ignition Key - Must be inserted to start the

engine,

Primer Button - Injects fuel directly into the carburetor manifold for fast starts in cold

weather.

Recoil Starter Handle - Starts the engine manually.

Throttle Control - Controls the engine speed.

Electric Starter Button - Used to start the

engine using the 120 V. electric starter. Remote Chute Control Lever- Push for-

ward to discharge snow high and far. Pull remote lever back to discharge snow down.

Shear Bolts - Are special bolts that are de- signed to break (to protect the

machine) if an object becomes lodged in the auger housing. Use of a harder bolt will de- stroy the protection provided by the shear bolt.

Toolbox - Spare shear pins and spacers are located in toolbox.

/_ CAUTION: Read owner'smanual before operating machine. Never direct

discharge toward bystanders. Release the auger control bar and stop the engine before unclogging discharge chute or auger

housing and before leaving the machine.

Ignition

key_

control

Recoil

starter

Throttle

handle

 

TO CONTROL SNOW DISCHARGE

•Turn the crank assembly to set the direc- tion of the snow throwing.

•Adjust snow chute deflector to set the distance, Push remote lever forward to

discharge snow down. Pull remote lever back to discharge snow high and far, See figure below.

knob

TO MOVE FORWARD AND

BACKWARD

•To shift, release the traction drive lever and move the speed shifter lever to the speed you desire. Ground speed is deter- mined by snow conditions. Select the speed you desire by moving the speed shifter lever into the appropriate area on the control panel.

Speeds 1,2 - Wet, Heavy, Extra Deep Speed 3 - Light

Speed 4 - Very Light

Speeds 5, 6 - Transport only

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Snow Thrower Limited TWO-YEAR Warranty on Craftsman Snow Thrower Contents Service and Adjustments 18-22 Warranty StorageTraining Preparation OperationFlatwasher Maintenance and StorageSteep sloping surfaces. do not USE Snow Thrower on Surfaces 8-16 Hex Jam NutsGlasses or eye shields while assembling snow thrower Tools Required for AssemblySpeed Lever HOW to SET UP Your Snow Thrower To Installthe Upper Handle and CrankassemblyReplace carriage bolt AssembleSpeed Selector ROD Remote Chute Control Knob HeadlightKnow Your Snow Thrower Chute Chute Deflector DeflectorTo Move Forward Backward Howto Useyour Snow ThrowerTo Control Snow Discharge To Stopyour SnowthrowerBefore Starting the Engine To Throw SnowTo USE Wheel Lockout PIN Checkthe OILFill GAS Cold StartTo Start Engine Recoil Starter Warm StartPush down on the starter button until Be sure the auger drive and traction driveGages. Then continue with the directions for cold start Frozen Recoil StarterSnow Throwing Tips For maximum snow thrower efficiencyCustomer Responsibilities Service Schedule Dates Records Lubrication ChartSnow Thrower After First USE Lubrication Every 10 HoursLubrication Before Storage After Each USEEngine Lubrication LubricationOIL Recommendation Spark PlugTo Adjust Scraper BAR To Adjust Skid HeightTo Adjustthe Clutch Control Cables Auger Drive Belt To Adjust BeltsTo Replace Belts Traction Drive BeltTo Adjustthe Belt Guide To Adjust the Friction WheelEnd nuts To Replace Friction WheelAuger Replace bottom panelTo Adjust To Adjust or Replace Spark PlugTo Adjust Carburetor To Replace Auger Shear BoltOther Snow Thrower StorageEngine Storage Steps belowTrouble Cause Correction

536.88123 specifications

The Craftsman 536.88123 is a powerful and versatile snow blower designed to tackle the toughest winter weather conditions. With its robust construction and advanced features, this machine is engineered for homeowners who desire efficiency and reliability in snow removal.

One of the standout features of the Craftsman 536.88123 is its impressive 27-inch clearing width. This wide path allows users to cover large areas quickly, making it suitable for both residential driveways and sidewalks. The snow blower is equipped with a strong and efficient 2-stage auger system that not only breaks up compact snow but also throws it far away from the cleared area. This ensures that snow is efficiently removed without simply pushing it aside, which can cause buildup over time.

Another significant characteristic of this model is its powerful 357cc engine, delivering substantial torque and performance. This engine is designed to handle heavy, wet snow with ease, providing users with the confidence to tackle even the most challenging conditions. The electric start feature adds convenience for those cold, winter mornings, allowing for easy ignition without the need for strenuous pulling.

The Craftsman 536.88123 is also designed for user comfort and ease of operation. The adjustable handle ensures a comfortable grip, and it can be modified to fit the user’s height. This snow blower features six forward and two reverse speeds, giving users full control over their snow clearing experience. The durable, rubber-edged auger not only provides efficient snow removal but also protects surfaces underneath, minimizing the risk of damage.

Additionally, the snow blower comes with a remote chute control system, allowing users to easily direct the snow discharge without having to manually adjust the chute. This feature is particularly beneficial for users who need to navigate around obstacles while working.

In terms of durability, the Craftsman 536.88123 is built with high-quality materials designed to withstand harsh conditions, ensuring longevity and dependable performance year after year.

With its combination of power, efficiency, and user-friendly design, the Craftsman 536.88123 is a top choice for those looking for a reliable solution to winter snow challenges. Whether you're clearing your driveway, sidewalk, or patio, this snow blower promises to make your winter maintenance tasks manageable and less labor-intensive.
Top Page Image Contents