Craftsman 536.88123 operating instructions Fill GAS, Cold Start

Page 12

FILL GAS

NOTICE: ENGINES WHICH ARE CERTI- FIED TO COMPLY WITH CALIFORNIA AND US EPA EMISSION REGULATIONS FOR ULGE ENGINES: Are certified to oper-

ate on regular unleadedgasoline. Include the following emisssion control system(s): EM, TWC (if so equipped). Include any user

adjustable features - therefore no other adustments are needed.

WARNING: Experience indicates that alco- hol blended fuels (called gasohol or those using ethanol or methanol) can attract mois- ture which leads to separation and formation of acids during storage. Acidic gas can dam- age the fuel system of an engine while in storage.

To avoid engine problems, the fuel system should be emptied before storage for 30 days or longer. Start the engine and let it run until the fuel lines and carburetor are empty. Use the carburetor bowl drain to empty re- sidual gasoline from the float chamber. Use fresh fuel next season (See Storage instruc- tions on page 23 for additional information).

For extreme cold operating conditions of 0°F and below, use a partial synthetic 0W30 mo- tor oil for easier starting.

Never use engine or carburetor cleaner prod- ucts in the fuel tank or permanent damage

may occur.

Fill the fuel tank with a fresh, clean, un- leaded regular, unleaded premium, or reformulated automotive gasoline only. DO NOT use leaded gasoline. Be sure that the container you pour the gasoline from is clean and free from rust or other foreign particles.

Never use gasoline that may be stale

/_ from long periods of storage in the con- tainer.

CAUTION: Gasoline is flammable and cau-

tion must be used when handling or storing it.

Do not fill fuel tank while snow thrower is

running, when it is hot, or when snow thrower is in an enclosed area.

Keep away from open flame or an electrical

spark and DO NOT SMOKE while filling the fuel tank.

Never fill the tank completely. Fill the tank to within 1/4" - 1/2" from the top to provide space for expansion of fuel.

Always fill fuel tank outdoors and use a fun- nel or spout to prevent spilling.

Make sure to wipe up any spilled fuel before starting the engine.

Store gasoline in a clean, approved con-

_)eS_'_ll_4_R_p in place on the con- taiQer.

•_o stop engine, move the throttle control lever to O (STOP) position and remove key. Keep the key in a safe place. The engine will not start without the key. NOTE: DO NOT turn key.

TO START ENGINE (Electric Starter)

Be sure that the engine has sufficient oil. The snow thrower engine is equipped with a 120 volt A.C. electric starter and recoil

starter. Before starting the engine, be cer-

tain that you have read the following infor- mation:

Z_ CAUTION: This starter is equipped with a three-wire power cord and plug

and is designed to operate on 120 volt AC household current. It must be properly grounded at all times to avoid the possibility of electrical shock which may be injurious to operator. Follow all instructions carefully as set forth in the "To Start Engine" section,

Determine that your house wiring is a three- wire grounded system. Ask a licensed eLec- trician if you are not sure. If your house wire system is not a three-wire system, do not use this electric starter under any condi- tions. If your system is grounded and a three-hole receptacle is not available at the point your starter will normally be used, one should be installed by a licensed electrician. When connecting 120 volt AC power cord, always connect the cord to the switch box on the engine first, then plug the other end into the three-hole grounded receptacle. When disconnecting power cord, always unplug the end in the three-hole grounded receptacle first.

COLD START

•Be sure the auger drive and traction drive levers are in the disengaged (released) position.

•Move the throttle control to '_ (FAST) position. See figure on page 9.

•Remove the keys from the plastic bag. Insert one key into the ignition slot. Be sure it snaps into place. DO NOT TURN KEY. Keep the second key in a safe place.

•Rotate the choke knob to H choke ON position. See figure on page 9.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Snow Thrower Contents Service and Adjustments 18-22 Warranty Storage Limited TWO-YEAR Warranty on Craftsman Snow ThrowerTraining Preparation OperationMaintenance and Storage Steep sloping surfaces. do not USE Snow Thrower on SurfacesFlatwasher 8-16 Hex Jam NutsTools Required for Assembly Glasses or eye shields while assembling snow throwerSpeed Lever HOW to SET UP Your Snow Thrower To Installthe Upper Handle and CrankassemblyAssemble Replace carriage boltSpeed Selector ROD Remote Chute Control Knob HeadlightKnow Your Snow Thrower Chute Chute Deflector DeflectorHowto Useyour Snow Thrower To Control Snow DischargeTo Move Forward Backward To Stopyour SnowthrowerTo Throw Snow To USE Wheel Lockout PINBefore Starting the Engine Checkthe OILFill GAS Cold StartWarm Start Push down on the starter button untilTo Start Engine Recoil Starter Be sure the auger drive and traction driveFrozen Recoil Starter Snow Throwing TipsGages. Then continue with the directions for cold start For maximum snow thrower efficiencyCustomer Responsibilities Service Schedule Dates Records Lubrication ChartLubrication Every 10 Hours Lubrication Before StorageSnow Thrower After First USE After Each USELubrication OIL RecommendationEngine Lubrication Spark PlugTo Adjust Skid Height To Adjust Scraper BARTo Adjustthe Clutch Control Cables To Adjust Belts To Replace BeltsAuger Drive Belt Traction Drive BeltTo Adjustthe Belt Guide To Adjust the Friction WheelTo Replace Friction Wheel AugerEnd nuts Replace bottom panelTo Adjust or Replace Spark Plug To Adjust CarburetorTo Adjust To Replace Auger Shear BoltSnow Thrower Storage Engine StorageOther Steps belowTrouble Cause Correction

536.88123 specifications

The Craftsman 536.88123 is a powerful and versatile snow blower designed to tackle the toughest winter weather conditions. With its robust construction and advanced features, this machine is engineered for homeowners who desire efficiency and reliability in snow removal.

One of the standout features of the Craftsman 536.88123 is its impressive 27-inch clearing width. This wide path allows users to cover large areas quickly, making it suitable for both residential driveways and sidewalks. The snow blower is equipped with a strong and efficient 2-stage auger system that not only breaks up compact snow but also throws it far away from the cleared area. This ensures that snow is efficiently removed without simply pushing it aside, which can cause buildup over time.

Another significant characteristic of this model is its powerful 357cc engine, delivering substantial torque and performance. This engine is designed to handle heavy, wet snow with ease, providing users with the confidence to tackle even the most challenging conditions. The electric start feature adds convenience for those cold, winter mornings, allowing for easy ignition without the need for strenuous pulling.

The Craftsman 536.88123 is also designed for user comfort and ease of operation. The adjustable handle ensures a comfortable grip, and it can be modified to fit the user’s height. This snow blower features six forward and two reverse speeds, giving users full control over their snow clearing experience. The durable, rubber-edged auger not only provides efficient snow removal but also protects surfaces underneath, minimizing the risk of damage.

Additionally, the snow blower comes with a remote chute control system, allowing users to easily direct the snow discharge without having to manually adjust the chute. This feature is particularly beneficial for users who need to navigate around obstacles while working.

In terms of durability, the Craftsman 536.88123 is built with high-quality materials designed to withstand harsh conditions, ensuring longevity and dependable performance year after year.

With its combination of power, efficiency, and user-friendly design, the Craftsman 536.88123 is a top choice for those looking for a reliable solution to winter snow challenges. Whether you're clearing your driveway, sidewalk, or patio, this snow blower promises to make your winter maintenance tasks manageable and less labor-intensive.
Top Page Image Contents