SMC Networks M8501 Setting up the M8502 ACL Tabletop, 4. Tabletop Model Clearances, inches, 15.2

Setting Up the ACL Tape Drives Setting up the M8502 ACL Tabletop

14.Attach the unit to the rack using two 10-32 captive thumbscrews that are located on the lower left and right front panel.

15.Fully tighten the rear-mounting bracket screws.

Setting up the M8502 ACL Tabletop

The M8502 ACL tabletop requires no mechanical assembly for mounting (see Figure 2-4). Place the unit on a desk, table, or other stable horizontal surface. Ensure that the cooling grills at the front and the fans at the rear of the unit are not obstructed. Allow 12 inches (30.4 centimeters) of clearance at the front and 6 inches (15.2 centimeters) at the rear of the unit to allow for adequate cooling.

Figure 2-4. Tabletop Model Clearances

	6 inches
12 inches	(15.2
(30.4	centi-
centi-	meters)
meters)

M8501 and M8502 ACL Tape Drive Installation and User’s Guide — 529972-001

2-5